Productivity and efficiency are paramount in the highly competitive snack food production industry. JD Manufacturing, Inc (JDM) in Pine Bluffs, WY, stands out as a leader with its high-performance automatic batch fryers, which are engineered specifically for kettle chip production. The batch frying process imparts kettle chips, whether made from potatoes, sweet potatoes, parsnips, carrots, or beets, with their distinctive premium texture and taste.
There’s a delicate balance in the constant evolution of today’s assembly line. Once dominated by hydraulics, manufacturing floors are incorporating a growing number of electromechanical solutions to supplement legacy hydraulic components, particularly in lower force, linear motion applications. Manufacturers that recognize this trend and harness the benefits of both hydraulic and electromechanical solutions position themselves to optimize future operations, regardless of market trend demands.
A provider of engineering services in the hydraulic and pneumatic industry anticipates new orders in 2025 for movie prop platforms that use low-coefficient-of-friction Vesconite bushings. It hopes to produce several platforms in 2025, which will add to the number of platforms that it has produced since its first foray into the movie industry in May 2005.
State-of-the-art doesn’t begin to describe ABB’s revamped robotics and training facility in Auburn Hills, MI. The upgraded factory serves as a U.S. hub for developing AI-enabled technology helping businesses respond to labor shortages, global uncertainty and sustainable manufacturing.
The applications are too numerous to list in their entirety. Coffee grounds. Eggshell waste. Pomegranates and pineapples. Manure and paper mill sludge. Tobacco. These are just a few of the materials that require dewatering, a process that—as its name suggests—separates fluids from solids, often converting what would otherwise go down the drain or end up in a landfill into saleable products.
Coverage of IMTS and MINExpo International will continue on the PTE website through the end of the year and into 2025. We're excited to share the stories and new technologies discussed at both trade shows in September.
Our next legacy entry is maxon, a global leading provider of electric drive systems. The company provides single-source DC and BLDC motors, gearheads, sensors, control electronics, mechatronic drive systems and more-from individual prototypes to large-scale production. The history of maxon begins with Interelectric AG in Frankfurt.
Dual loop control is often used to improve the performance of a motion control system. Although this appears more complex at first look, the overall system cost and complexity needed to reach the desired level of precision may often be significantly reduced. In the example system, mechanical stiffness was improved by a factor of approximately 100 by the use of a secondary feedback device.In the case of a single loop lead screw system, the feedback is usually located on the back of the motor.
Mitsubishi Electric Corporation recently announced that it had been awarded a Guinness World Records title on May 21, 2024, for the fastest robot to solve a puzzle cube using the TOKUI Fast Accurate Synchronized Motion Testing Robot (TOKUFASTbot). The previous record of 0.38 seconds was trumped by TOKUFASTbot's time of 0.305 seconds.
The manufacturing industry often sets the trends for technology adoption in industrial settings. For example, the automation journey began a half-century ago with the first industrial robot — a 2,700-pound behemoth Unimate prototype — installed in a GM factory in 1959. Since then, robotics technology has significantly evolved and expanded beyond traditional manufacturing. Today, robots are integral to various industries, undertaking tasks like automated bricklaying in construction, efficient goods handling in logistics and warehousing and critical functions such as dispensing medication within hospitals.
MINExpo boasts 1,900+ companies involved in the global mining industry. Opening sessions allow the industry to come together to debate global challenges, market fluctuations and the future of mining. Resources include exploration, mine site development, open pit mining, underground mining, smelting and refining, processing and preparation and reclamation.
Mechanical and electronic engineering continues to play a significant role in the changing transportation landscape. Areas such as connected vehicles, autonomous driving, new components and software-designed modules will push the latest EV technologies for the next ten to 15 years. Mechatronics will play a pivotal role in these advancements.
The "Engineering Legacy" series gives historical context to mechanical power transmission components featured in PTE. Diamond Chain’s products were integral in many historical breakthroughs, including the Wright Brothers’ first flying machine, Henry Ford’s first automobile, and numerous motorsport champion vehicles.
In this article, the focus turns to the dynamic modeling of ball bearings, and the benefits of this approach when analyzing high-speed ball bearings.
LIFT in Detroit was the perfect host for the AGMA Technical Division to lead a recent meeting on EV standards development. Gear and power transmission engineers who work directly on gearboxes for electric vehicles came together to review current relevant standards and create an information sheet for gears specific to EVs.
Linear guides, bushings, ball screws, stages, tables and motion control systems continue to evolve to meet the needs of factory automation, machine tools, and mechatronics. These components will continue to add sensors, electronics and software to meet new industrial requirements. We've spent time on the trade show circuit recently to report on new innovations in linear motion technology.
Almost 43,000 registrants came together in Chicago to seek out the latest and greatest automation and robotic technologies during Automate 2024 in May. As always, A3 did not disappoint with a comprehensive conference paired with new automation technologies on the exhibition floor.
At a Gulf Coast seawater cooling pump station, the resilience of Vesconite Hilube bearings in hypochlorite came to the forefront, showcasing their superiority in challenging environments.
Gear drives are fundamental in most processing operations, connecting the prime mover to the driven equipment and ensuring that the system has enough torque to effectively move product. Correctly specifying and selecting the proper gear drives for critical applications leads to reliability, greater uptime, and profitability.
It’s common to hear the metaverse described as a 3D experience layer of the internet. The “industrial metaverse” is a more difficult concept to define. According to Forrester, it’s an umbrella term for a collection of different technologies. Some of those technologies have existed for years just waiting to come together.
Following a previous blog on the topic, Understanding the Industrial Metaverse, in this blog Stephen Graham, executive vice president and general manager, Nexus, takes an introductory look at the four building blocks, highlighting some of the key issues.
The inaugural North American version of the Lubricant Expo and The Bearing Show took place last week at Huntington Place in Detroit. A vibrant conference/education schedule balanced an informative group of exhibitors discussing component challenges, system upgrades and future trends. Innovation in the automotive, transportation and energy industries is keeping R&D departments busier than ever. Here’s why:
When precision and efficiency reign supreme, every component plays a role in ensuring optimal performance. Among these components, gear pumps stand out as essential workhorses, facilitating the smooth transfer of fluid power within intricate systems.
The Bearing Show is North Americas newest exhibition and conference, connecting the evolving needs of bearings end-users with the latest technologies serving, OEM development, maintenance professionals and R&D engineers. Meet visitors from OEM’s, machine manufacturers, industrial plants, global distributors, and more. Matching the needs of end-users with the innovation and opportunities occurring throughout the supply-chain is essential. PTE recently interviewed Thomas Harris, event director, Lubricant Expo and The Bearing Show North Americas, to discuss the evolution of the event and what to expect from the show in late March.
IIjin Electric's collaboration with Siemens began with the company's efforts to effectively integrate electrical design with mechanical design. “This collaboration went beyond simply changing tools. It represented a major advancement in the company's design approach and methodology.
The low voltage (LV) AC drive market saw unit shipments surpass 20 million in 2023 as the market continues to expand, new data from Interact Analysis shows. According to the market intelligence specialist, the pace of growth slowed last year and is expected to continue to do so in 2024, with steady growth returning to the global drives market in 2025.
CES 2024 boasted 4,300+ exhibitors, including a record 1,400+ startups from around the globe. The event continued to showcase the innovative trends shaping our future.
CES 2024 is taking place in Las Vegas this week from January 9-12, 2024. While there's plenty of opportunities to find the latest gadgets in personal tech, the show has evolved through the years to include some key exhibitors in areas like aerospace, e-mobility, and automation/robotics.
The global geared motors and industrial gears (geared products) market was expected to generate $14.2 billion in revenues in 2023, a slight decrease of 0.7 percent from 2022. However, over the next five years we anticipate the market will resume a steady growth trajectory following a further dip in 2024.
Motor & Drive Systems is focused on the latest technical advancements impacting the design, integration, and efficiency of motor, drive systems, and motion control for automation, robotics, manufacturing, and industrial, as well as utilities and automotive applications.
Digital transformation is an ongoing process so we can expect to see this year's breakthrough trends continuing to shape society into next year. But how will these trends impact robotics and automation and what can the manufacturing industry expect to see next year?
Solid Edge is a portfolio of affordable, easy-to-use software tools that address all aspects of the product development process. Solid Edge combines the speed and simplicity of direct modeling with the flexibility and control of parametric design – made possible with synchronous technology. The following Q&A discusses Solid Edge 2024 with Dan Staples, vice president, mainstream engineering, Siemens Digital Industries Software.
Global market intelligence firm Interact Analysis recently made some revisions to its global manufacturing outlook forecast. According to the company’s latest research, the outlook for global manufacturing is bleak, and this looks set to continue throughout 2024 into early 2025. Europe in particular is feeling the pinch, while the Americas region fared well during the first half of 2023. Due to the semiconductor slump, manufacturing output in the Asia Pacific region is declining – the region accounts for almost 90% of semiconductor and components production.
GT and PTE Presents "Ask the Expert Live," taking place October 17-18 during the Motion + Power Technology Expo at Huntington Place in Detroit.
This year, rather than focusing on gear basics or the more technical aspects of gear design and manufacturing, we’ve decided to address some of the issues that you’ve told us are most significant to you—the things you’re struggling with, the questions you’re hoping to find answers for, and the troubles that keep you up at night.
The Dune Express is a 42-mile long, fully electric conveyor system that is expected to transform the Permian Basin and substantially improve the unacceptable safety risk existing on the Permian roadways. Originating from the Kermit, Texas facility and spanning into New Mexico, the Dune Express is intended to eliminate millions of truck miles driven across the Permian resulting in avoided traffic, accidents, injuries, and fatalities within the communities.
Unless you work for a major network, you’ve probably never heard of them. But without the efforts of Drew Farrow and the team at ShowFab many of your favorite Broadway shows, news programs, and broadcast sporting events would not be possible. That’s because there’d be no colorful backdrops, no glitzy displays, and no lights or cameras moving silently overhead. The reason they’re silent? Nord Drivesystems whose gearmotors position the massive scenery seen moving in and above the sets of The Today Show, Fox News, Fox Sports, The NFL Network, and NewsNation, to name a few.
New research by market intelligence firm Interact Analysis shows that the ultra-low voltage motors market is experiencing a period of growth. By 2027 the market will be worth almost $6.5bn driven by demand from battery driven applications and a need for greater flexibility in manufacturing and logistics processes. The increased use of mobile robots is having a huge impact on the market for ultra-low voltage motors and, as a result of this, the supplier landscape will change significantly.
When engineers at Hoover Dam determined that the original cast iron lantern rings built into some of its turbines needed to be replaced, they were looking for a solution to help them overcome the corrosion issues they experienced with the cast iron.
Festo Didactic recently provided SkillsUSA Championship Competition participants (Mechatronics Section) with advanced training technology at the 2023 National Leadership and Skills Conference June 19-23, Georgia World Congress Center and State Farm Arena, Atlanta.
With the VarioFlow plus chain conveyor system, Bosch Rexroth supplies an essential component for flexible and economical transport within a plant. It conveys packed and unpacked goods vertically and horizontally in the smallest possible space. Together, with the spiral transport system from smartPac Srl, manufacturers benefit from a continuous spiral transport system with low commissioning and maintenance costs.
When older equipment starts to affect the output from the power plant – operators need to act fast, to avoid production risks escalating. This is especially true for legacy pumps. However, sourcing new units to fit the surrounding infrastructure and application requirements of the plant can be challenging. When a major thermal power plant in Rajasthan, India, faced multiple issues with an aging boiler infeed pump, the energy player overcame supply and technical challenges through their partnership with Sulzer. Sulzer provided a custom solution under its OEM-X line service, that cushioned the impact to production, while offering the assurance of reliable associated support, spanning maintenance and spares for decades to come.
The 2023 EASA Convention, June 25-27, at the Gaylord National Resort & Convention Center in National Harbor, MD. EASA (https://easa.com/convention) supports companies involved in the service and sale of electric motors, pumps, drives, controls, gearboxes and other rotating machinery. Highlights include synchronous motors, machine reliability, leadership, sustainability, EASA's 90th birthday bash, motor maintenance, pump repair, supply chain issues and more.
A hydro turbine company based in Portland, Maine, has chosen Vesconite Bearings’ lowest-friction material for the thrust bearings on its free-stream turbines.
Automate 2023 features educational tracks on everything from AI, smart automation, and innovations to AMRs and collaborative robots. The following article examines some of the key topics and presentations during the show.
According to updated research by market intelligence firm Interact Analysis, the collaborative robot (cobot) market will enjoy modest growth out to 2032, with annual growth rates sitting at around 20 percent. ‘Collaboration’ between humans and robots is now widely accepted so robot manufacturers suggest that the key to future success will be their ability to scale up production and develop new application scenarios. The logistics industry will also play an important role in this growth trajectory.
The SolarButterfly is focused on reaching millions of people, alerting them to the companies and individuals that are integral in transitioning societies away from fossil fuels toward clean energy technologies. Presently on a four-year journey around the world, the SolarButterfly plans to identify, record, and publicize at least a thousand climate protection pioneers and their solutions.
The leading automation showcase in North America, Automate, is back in Detroit May 22-25, 2023, with the latest in cutting-edge robotics, vision, artificial intelligence, motion control and more. Produced by the Association for Advancing Automation (A3), Automate delivers the latest innovations in manufacturing automation technology from more than 600 leading exhibitors. Each day also offers inspirational keynote sessions and theater presentations to help attendees find the best solutions for their unique business needs.
Deutsche Messe is reporting 4,000 exhibitors in 2023 and 130,000+ attendees searching for the latest developments in electrification, sustainability, and digital solutions. While one might wonder if the show will ever reach pre-pandemic levels again, it was obvious there’s still a very focused global manufacturing network looking to solve climate, energy, and automation challenges in the coming years.
Designers of robotics and automation solutions are often faced with a choice: cycloid or planetary gears? In the last few decades, the answer has often been cycloidal drives. But the planetary gears have caught up and are now superior in many ways. The Hamelin company Schaeffler Ultra Precision Drives (previously Melior Motion) has revolutionized the planetary gear and with its PSC series, produces extremely precise, quiet and durable drive units.
PTE will feature a variety of new component technologies online for bearings, motors, couplings, brakes, gear drives, and motion control systems leading up to Hannover Messe 2023 in Germany. Here is a preview of some bearings suppliers to check out if you're planning on attending the event online or in-person in April.
PTE will feature a variety of new component technologies online for bearings, motors, couplings, brakes, gear drives, and motion control systems leading up to Hannover Messe 2023 in Germany. Here is a preview of some couplings suppliers to check out if you're planning on attending the event online or in-person in April.
Priorities in the construction, off-highway and agriculture sectors seem to focus on longevity, energy efficiency and maximizing speed and torque. Every press conference and booth visit so far at IFPE and ConExpo support this claim. Components need to meet strict environmental guidelines while maximizing power. Success in these markets depends on condition monitoring technologies, quick-change components and the ability to meet power density requirements.
The International Fluid Power Exposition (IFPE), Las Vegas March 14-18, is where fluid power professionals meet to discover highly engineered solutions for improving mobile and industrial equipment's efficiency, performance, and sustainability. Attendees will also learn about the latest technology available to the industry and network to discuss and combat the most pressing industrial challenges.
EV developers are finding a competitive edge through efficiency gains not only in new battery pack technology and electronic components, but also through new developments in electric machines.
PTE will feature a variety of new component technologies online for bearings, motors, couplings, brakes, gear drives, and motion control systems leading up to Hannover Messe 2023 in Germany. First up is a preview of some motor suppliers to check out if you're planning on attending the event online or in-person in April.
Electrification is changing the automotive industry wholesale. This online article looks at training and transmission technology courses available in the e-mobility sector today. Coursework includes examining gearbox structure to battery technology to health and safety issues. This expansion continues to prepare engineers, manufacturers, and technicians for the shift toward electric vehicles.
Automate delivers the latest innovations in manufacturing automation technology from more than 600 leading exhibitors. Each day also offers inspirational keynote sessions and theater presentations to help attendees find the best solutions for their unique business needs.
Heat is also generated in an e-motor, sometimes quite a bit. In demanding applications, the motor electronics cause the power to be throttled or even shut down completely. But there is another clever way to protect an electric motor from overheating without losing power: using a thermally conductive casting resin as a heat transfer medium. The principle can also be called a static solid cooling system.
Siemens Digital Industries Software recently announced the opening of eXplore Live at The Smart Factory @ Wichita, an experience center convened by Deloitte that marries an ecosystem of world-leading organizations with business strategy and cutting-edge technology to demonstrate Industry 4.0.
Industrial maintenance consists of keeping equipment running as long as possible. Corrective, preventive and now predictive maintenance has taken a long time to be recognized as an activity in its own right. Since then, it has shown its importance and added value to the point of being a lever for continuous improvement and development in companies.
The first fully automated McDonald's has arrived in Fort Worth, Texas. Here, a conveyor belt serves customers food they order online or using a kiosk machine. The fast-food restaurant has no seats, tables or drive-thru greeters.
The Dudley, UK factory of The Timken Company supplies the engineered bearings it manufactures into a multitude of industries including mining, food and beverage, pulp and paper, cement, marine, and wastewater. Recently there has been a significant increase in demand for larger bearings up to 1,200 mm in diameter for use in the construction of wind turbines, which promises exponential growth in the coming years as countries across the globe work towards meeting their green energy targets.
For optimal gear design in accordance with requirements, it is essential to consider load spectra under the most realistic conditions possible as early as the virtual basic design phase. This is the only way to ensure that all components are loaded as evenly as possible to avoid overdimensioning.
Optimized design saves resources and costs and improves the CO2 balance – an aspect that is becoming increasingly important in the current environment and can offer a competitive advantage. Load spectrum calculations are also important for replacing complex time and cost-intensive experiments by simulating test rig damage tests.
Next-generation technology—everything from the electrification of vehicles to e-motors, bearings, mechatronics, and thermal management—was discussed during the Schaeffler Symposium 2022 in Detroit. I sat down with Jitesh Modi, director of engineering, during the event to discuss the “reinvention” of bearings for EV applications.
Across three days, the relaunched Smart Production Solutions (SPS) 2022 event in Nuremberg, Germany, attracted a total of almost 44,000 visitors in November.
Patience was the theme in Dearborn, Mich., in late October when Gerdau hosted speakers from the Center for Automotive Research (CAR), Wards Intelligence, Heavy Duty Manufacturers Association, Munro & Associates, American Axle, AGMA, and the company’s own Denise Correa De Oliveira for a comprehensive discussion on the present and future challenges facing the electric vehicle market.
NORD DRIVESYSTEMS delivers intralogistics solutions that focus on high-efficiency, intelligent automation, and reduced Total Cost of Ownership (TCO). Their innovative drive solutions are extremely versatile and used throughout the world in a wide variety of applications including storage and retrieval systems, transfer carts, and conveyor systems. NORD’s modular product portfolio consists of reliable, UNICASE gear units with long service life, powerful high-efficiency motors, and dynamic variable frequency drives that optimize automation. Easy to service and maintain, NORD drives reduce standstill times and contribute to an increased efficiency and availability of entire systems.
Kollmorgen is all about innovation, constantly investing in collaborations and research projects to exchange knowledge and expertise with partners and universities across the world. Not only does it generate creativity amongst employees, but it also helps customers, partners, and students worldwide to realize their ideas. Someone who is much involved in Kollmorgen’s innovation projects and initiatives is Simon Bokesand, senior innovation engineer.
The European Union aims to expand the capacity for wind power generated at sea to at least 60 gigawatts by 2030. With its sealing solutions for the foundation structures, Freudenberg Sealing Technologies helps ensure that new wind turbines reach a service life of at least 30 years or more despite the rough conditions at sea.
Next-generation technology—everything from the electrification of vehicles to e-motors, bearings, mechatronics, and thermal management—was recently discussed during the Schaeffler Symposium 2022 in Detroit.
Emerson Bearing recently delivered this great back to basics blog on rod ends. Emerson Bearing and Action Bearing serve the bearing needs of international and domestic customers. The team at Emerson Bearing caters to global niche markets, while the team at Action Bearing, specializes in solutions for the OEM and MRO markets in New England.
The top three suppliers of low voltage AC motors made waves in the motor and drives space with a string of acquisition announcements in August. First, WEG announced its acquisition of Gefran’s motion control business. Then, on August 11th, ABB announced its acquisition of Siemens’ NEMA motor business. Both developments are significant within the motor and drives market and serve to highlight portions of each company’s industrial automation strategy. In this insight, we’ll unpack both of these acquisitions and explain their implications on the broader motor and drives markets.
The International Fluid Power Exposition (IFPE), along with the Association of Equipment Manufacturers (AEM), have released another research whitepaper leading up to the return of the show to the Las Vegas Convention Center, March 14-18, 2023, along with the co-located CONEXPO-CON/AGG.
Pack Expo International is produced by PMMI, the Association for Packaging and Processing Technologies. North America’s largest packaging event will bring together the solutions needed to launch new products and solve production issues. This article is PTE's second round of booth previews prior to the show.
Walk into any gear manufacturing facility and you'll find legacy equipment that has been running successfully for decades. While these machines offer insight from a historical perspective, it's the equipment moving gears through production cells hinting at the factory of the future and the role robotics and automation will play.
Every machine builder knows that they have to meet stringent safety requirements to protect workers from the risk of injury. If they build machines for the EU market, they should know that the European regulatory landscape is more advanced than in most other regions, with newer and more rigorous requirements for safety design and testing.
EU-equivalent safety capabilities are also being adopted by many non-European manufacturers despite the lack of specific in-country regulations. Sooner or later, every machine builder will need to offer functional safety capabilities or be left behind. Let’s look at what that means.
What's the latest in software design and simulation in the power transmission market? Here's a recap of some of the latest software solutions for bearings, gears, drivetrains and e-mobility applications.
Wind farms are expanding around the world. This is good for climate change. Wind turbines are being installed on the high seas with nacelle heights of more than 100 meters and rotor diameters of nearly 170 meters. This increases both the electricity yield and economic efficiency. Freudenberg is aiding wind power’s conquest with high performance components and materials.
We’ve covered SKF in medical, wind turbine, hand tool, solar panel, and compressor applications. We’ve examined SKF bearings utilized in crazy, out-of-this-world, aerospace applications. Nothing, however, tops the seal of approval coming from a professional skater in Europe.
The following article looks at the latest news on servo motors, drives and motors. How do we differentiate between the definitions? What can design engineers find between a stepper and a servo motor? Also, a quick update this summer on the benefits of closed-loop motor control.
CTI Symposium Berlin starts with two introductory days dealing with the basics and practice of automotive transmissions, hybrid and electric drives for newcomers and those who want to refresh their knowledge. This is followed by the main program with keynote speeches, panel discussions and technical presentations.
Electric steel is used heavily in the manufacturing of electric motors. The material is key to producing the electromagnetic field used to turn the rotor. Without the electromagnetic properties associated with this iron alloy, the performance of electric motors would be substantially compromised. Historically, motors used in commercial and industrial applications have represented a major customer base for electric steel suppliers, and motor vendors have resultingly had little difficultly ensuring prioritized supply lines. However, the share of business held by commercial and industrial electric motor vendors is being threatened by the automotive sector in the wake of electric vehicles.
This exclusive round-up article from PTE examines the latest news and product technology involving smart bearings, motors and drives.
Engineers often face challenges when incorporating servo motors into a new machine design, such as choosing between a conventional housed motor or a frameless design. Kollmorgen engineers examine the components of a frameless motor and review three key design considerations that would indicate a frameless solution is the best fit for a machine.
With Sinumerik One, the first digital native CNC for machine tools, Siemens works with software to create the machine controller and the associated Digital Twin from one engineering system seamlessly. The latest iteration of the CNC system was on display recently at Automate 2022 in Detroit where machine tool builders and CNC users were able to witness the product, production, and performance benefits on the show floor.
ONYX Insight examines how digital tools can provide wind energy solutions, from day-to-day problem solving to future-proofing operations and maintenance (O&M) strategies through condition monitoring technologies.
Voith’s OnCare.Health monitoring solutions include an easy-to-use system for industrial fan and pump drivetrains. It employs state-of-the-art sensor technology and connected components to increase the system’s availability. This allows for easy and reliable monitoring of operating data as well as use in advanced IIoT applications such as predictive maintenance.
Torque transducers, test machinery, industrial robots, food and beverage and chemical applications are just a few of the areas coupling technology is advancing. This short round-up covers some of the latest product and industry news items in the power transmission and motion control market segments.
Servo motors are used in numerous markets to power machines, instruments, robots, and other factory automation applications. This Kollmorgen blog addresses five major elements of a conventional brushless DC servo motor: the rotor, stator, bearings, feedback and housing.
Applications for gearmotors are extremely varied as are the design and optimization tools available today. From online software to performance standards, here's the latest news on gearmotor technology.
Product design remains the most fascinating aspect of linear motion components as manufacturers try to answer the speed, size and efficiency challenges of customers utilizing rails, tables, actuators, sliders and other components. Companies like Heidenhain, AMTEK, NB Corporation and PBC Linear continue to provide technologies that increase productivity in this rapidly evolving market segment. Credit e-mobility, robotics, motion control and automation technologies for the market growth.
Automate 2022 in Detroit offered the latest and greatest in automation, robotics, and motion control technology. The perception that automation will threaten the livelihood of shop floor personnel is slowly giving way to the idea that these tools and resources will transform shop floors and keep companies up and running.
Gates Industrial Corporation continues to invest in and has expanded its Carbon Drive product portfolio. The company is introducing next-generation belts and other components to enable advances in bicycle drivetrain design and meet growing global demand.
Charging power. Infrastructure. Longer battery life. Every time the industry comes together for the CTI Symposium, we get a clearer picture of the technology development toward our electric future.
The latest trends and emerging technologies in areas like robotics, automation, mechatronics and motion control will be on-hand at Automate 2022 in Detroit. The following is a preview of some of the products that will be available on the show floor in June:
E-commerce consumers expect goods to be delivered faster and more flexibly than was the case just a couple of years ago. Organizations, retailers, and their warehouse service providers therefore need to find new ways to move, store, and dispatch goods with agility and accuracy. Add the widespread shortage of labor and you have an indisputable case for automated solutions to meet the myriad of challenges. Kollmorgen examines interoperability in the age of automation.
The range and flexibility of lubrication and sealing technologies continues to expand as companies look to scale down production times while increasing productivity. The industry is focused on environmental impact, automation and compact systems. Here’s just a few of the latest technologies in the industrial market:
One of ONYX’s customers and a leader in driving up the reliability and asset performance of the wind industry, Pattern Energy, uses ONYX turbine monitoring for over 1,100 wind turbines. Across this fleet ONYX connects several CMS hardware types to fleetMONITOR, a multi-brand solution for drivetrain monitoring. Two of the wind farms were retrofitted with ecoCMS in 2018, the technology with which ONYX disrupted the CMS industry.
The following article includes some of the new features and capabilities available for MESYS Rolling Bearing Calculation and MESYS Shaft Calculation:
The gear and gear drive segment of mechanical power transmission continues to focus on performance, reliability and safety. There are several new products offering increased load capacity, reduced friction and longer service life. For those components unable to keep up with industrial demands, there’s a gearbox MRO team waiting to handle emergency repair services.
LogiMat, May 31 - June 2 in Stuttgart, Germany, provides attendees with a comprehensive review of all the main themes in the logistics sector, from procurement to production and deliveries.
PTE examines educational and training programs in mechanical power transmission, automation, motion control, robotics and mechatronics regularly in the PTE Revolutions Blog. Today, we're looking at mechatronic training with Festo.
New communication features, European partnerships and high-performance stepper motors underline PTE's recent motor news coverage. Companies like Nidec Servo Corporation, Piezo Motion and Faulhaber are providing motor precision and reliability requirements for a wide variety of applications.
Bearings from SKF are playing a key role in a record-breaking engineering project – the world’s longest suspension bridge, which recently opened on March 18, 2022, in Turkey.
The fluid power industry has events on economics, future trends and new technologies in 2022.
Large gear manufacturing for mining applications is seeing an increase in activity in North America and Europe.
Power Transmission Engineering has your in-depth knowledge and expertise covered in terms of bearings, motors, drives, gears and motion control technologies. Here are some of the latest articles on bearing innovations:
Contact | Privacy Policy
©2025 Power Transmission Engineering
