The recent EUROTRANS General Assembly in Bad Homburg, Germany, on November 29, 2024, was highly productive, bringing together participants from 10 countries. The association extends heartfelt thanks to host Mr. Fabian Maurer, Ringspann GmbH, Bad Homburg, and his team for their hospitality.
The PTDA Foundation recognizes the urgent need for skilled professionals in the power transmission and motion control (PT/MC) industry. As such, it is committed to helping PT/MC employers further the education of current and upcoming talent with the introduction of two new scholarship programs.
The Society of Tribologists and Lubrication Engineers (STLE) — the premier technical society serving the needs of the tribology and lubrication engineering business sector — is pleased to announce the release of its new free digital special report, Knowledge Transfer Challenges in the Lubricants Industry.
State-of-the-art doesn’t begin to describe ABB’s revamped robotics and training facility in Auburn Hills, MI. The upgraded factory serves as a U.S. hub for developing AI-enabled technology helping businesses respond to labor shortages, global uncertainty and sustainable manufacturing.
ABB is opening its NEMA Motors Division world headquarters in Fort Smith, Arkansas, to the local community on Thursday, October 3, in celebration of Manufacturing Day (MFG Day), officially observed on Friday, October 4. This open house event is intended to educate and inspire students, parents, educators and community leaders about the future of manufacturing careers. ABB plans to engage with attendees through facility tours, demonstrating the industry’s critical role in driving innovation and highlighting diverse, sustainable career paths.
Global challenges and industrial competitiveness are having an impact on the training and continuous education of skilled workers and students. In addition to theoretical principles, practical knowledge is also in demand, particularly with regard to digitized and networked manufacturing processes. Virtual learning factories based on 3D simulation platforms offer interesting possibilities when it comes to Industry 4.0: The Mechatronic Simulation Wall developed by MHJ Software GmbH & Co. KG is a mirror image of real mechatronic systems and can include up to four different stations, e.g. magazine, processing, quality assurance and sorting. This type of configuration makes it possible to program each station individually, or run the entire system, which opens up a wide range of learning scenarios with varying degrees of complexity.
ABB Robotics recently announced its sponsorship of MassRobotics, the leading innovation hub and startup accelerator for robotics in the United States.
The Olympic Games in Paris are over – now another French metropolis is taking center stage: Lyon will host the 47th WorldSkills from September 10 to 15, 2024. The WorldSkills Championships will bring together more than 1,500 young people from over 65 countries and regions to compete in 62 competitions.
Every two years since 1950, young skilled workers from all over the world have competed in the WorldSkills Championships. They measure their skills in the individual trades in accordance with the demanding WorldSkills standards. The participants qualify beforehand through a national selection process.
The Timken Company has issued its corporate social responsibility (CSR) report, providing an update on the company's actions to improve the lives of individuals and communities, benefit the planet and strengthen its business.
ABB is equipping the next generation of professionals for advanced technology manufacturing by partnering with Arkansas Tech University’s Ozark campus to launch a career-readiness program. This collaborative workforce development initiative will offer a curriculum focused on automation technology, air conditioning and refrigeration.
The Power Transmission Distributors Association (PTDA) held its annual Canadian Conference in Niagara Falls, Canada on June 4-6. Nearly 130 power transmission/motion control (PT/MC) manufacturers and distributors doing business in Canada met to participate in networking and presentations aimed to expand opportunities for business growth.
Firmly committed to Industry 4.0 and the future of manufacturing, KUKA Robotics will highlight an innovative solution for educating the next generation of workers and its collaboration with three universities on cutting edge Mixed Reality (MR) demonstrations at Automate 2024, May 6 – 9 at McCormick Place in Chicago, Illinois.
Registration has officially opened for Pack Expo International, scheduled for Nov. 3–6 at McCormick Place in Chicago. The event is the largest and most comprehensive packaging and processing show worldwide for 2024. According to show producer PMMI, The Association for Packaging and Processing Technologies, the industry's growth underscores the need for manufacturers to access innovative solutions tailored to their diverse needs. From sustainability initiatives to automation advancements and AI integration, businesses now more than ever seek a central hub to discover solutions, stay abreast of the latest topics and trends, and build impactful connections.
Innomotics and the University of Pittsburgh's Swanson School of Engineering are thrilled to announce Josh Samuel Lubin as the recipient of the 2024 Peter Hammond Scholarship. A master’s student in engineering at the University of Pittsburgh Department of Electrical and Computer Engineering, Lubin has been selected to receive the scholarship for $10,000. Now in its fifth year, this award is presented to outstanding graduate students pursuing studies in electrical engineering, exemplifying both academic excellence and innovative research.
Norway is the official partner country of Hannover Messe 2024. Under the headline “pioneering the green industrial transition”, Norway will showcase digital technology and sustainable solutions for manufacturing. There will also be a strong focus on clean energy, including renewables, hydrogen, ammonia and CCS.
Bonfiglioli recently inaugurated Bonfiglioli Academy at Chennai Institute of Technology, marking a new milestone in their journey of cutting-edge technological innovation. This collaboration with the institute is a powerful example of bringing academic expertise and industry leadership together. Bonfiglioli is confident that this partnership will redefine research and development and create an environment where theoretical knowledge meets practical application.
An independent jury consisting of members of the FEMWORX Congress Advisory Board has nominated three young female experts for the Young Engineer Woman Award. The winner will be announced on April 26 during the FEMWORX Career Congress. As part of Hannover Messe, Deutsche Messe presents the Young Engineer Woman Award to young women who have made a special contribution to scientific and technical disciplines.
The PTDA Foundation is seeking nominations for its Wendy B. McDonald Woman of the Year Award and Robert K. Callahan Advancing Leaders Award.
The Association for Advancing Automation (A3) announced three longtime industry pioneers as the winners of the 2024 Joseph F. Engelberger Robotics Awards, the world's most prestigious robotics honor.
AD Mexico was thrilled to commemorate its 10th anniversary at the 2024 AD Mexico Spring Network Meeting, hosting the AD Mexico Divisional Board, Industrial and Safety Steering Committee, and Supplier Advisory Council, along with 120 AD Mexico electrical and industrial & safety members and suppliers to engage in networking opportunities and discussions on the achievements of 2023 and plans for expansion into new markets in 2024.
Elgeti online engineering seminars start next week. Registration is available for "Bearing Supplier Development" and "Failure Analysis." Additionally, Elgeti offers customized and private sessions if needed.
At the AGMA/ABMA annual meeting (held March 15–17 in Napa, CA), gear manufacturers, bearing manufacturers and industry suppliers spent a lot of time talking about one of the key issues affecting all of industry: finding and retaining skilled employees.
I hear about a lot of different approaches people are taking, including cooperations with local educational institutions, such as high schools, community colleges and technical trade schools. I heard the competition for dedicated young employees who are interested in joining a manufacturing team is so fierce that many companies who want to hire simply can’t. Some have even begun creating their own in-house training and education programs at least partially in order to bypass that competition and find and develop the necessary talent.
The Power Transmission Distributors Association (PTDA) will convene for the PTDA 2024 Canadian Conference in Niagara Falls, Ontario, Canada on June 4–6. Delegates in the power transmission/motion control (PT/MC) industry, representing PTDA distributor and manufacturer companies, will broaden cross-channel networks, expand connections and deepen business relationships.
The American Gear Manufacturers Association (AGMA) announces changes to its Board of Directors at the AGMA Members' Meeting during the Annual Meeting in Napa, CA. “AGMA would not be where it is today without the passion and diligence of its Board of Directors,” said Matthew E. Croson, President, AGMA. “I want to thank the outgoing Directors for their wisdom and guidance during the pandemic and for helping AGMA maneuver through the tough economic conditions that followed. I have full confidence in our new Directors as AGMA focuses on programs to improve the gear industry at home and forge new partnerships with like-minded associations and organizations abroad.”
The Bearing Show is North Americas newest exhibition and conference, connecting the evolving needs of bearings end-users with the latest technologies serving, OEM development, maintenance professionals and R&D engineers. Meet visitors from OEM’s, machine manufacturers, industrial plants, global distributors, and more. Matching the needs of end-users with the innovation and opportunities occurring throughout the supply-chain is essential. PTE recently interviewed Thomas Harris, event director, Lubricant Expo and The Bearing Show North Americas, to discuss the evolution of the event and what to expect from the show in late March.
Mark your calendars for March 19–21, 2024, as the Bearing Show—colocated with Lubricant Expo—descends upon Huntington Place in Detroit. As North America’s premier exhibition and conference dedicated to bearings, this free-to-attend event promises to be a groundbreaking convergence of industry leaders, technological advancements, and invaluable networking.
The Society of Tribologists and Lubrication Engineers (STLE) — the technical society for individuals in the field of tribology and lubrication engineering — announced that registration is now open for the 2024 STLE Annual Meeting & Exhibition, May 19-23, at the Minneapolis Convention Center in Minneapolis, Minnesota
The Association for Advancing Automation (A3) celebrates its 50th anniversary in 2024. The global advocate for the benefits of automation now represents more than 1280 member companies as it promotes automation technologies and ideas that transform and redefine the business environment.
The importance of standardization work is often underestimated or given little attention. For companies, it is often an important basis for innovation and competitiveness. It is therefore important to inspire young talents for standardization. Andre Thuswaldner, vice president of Eurotrans, described this topic vividly:
What are Standards?
Standards are documents that provide rules, guidelines and requirements for the design, production, use or performance of materials, products, processes, services or persons. They are the result of voluntary national, European and international standardization activities. The use of standards is voluntary. Standards only become binding if they are the subject of contracts between parties, for example between vendor and buyer, or if compliance with them is mandatory by law.
KISSsoft training courses cover various categories - basic, advanced, special - and take place either via Live Stream or at the KISSsoft AG premises in Switzerland. Based always on the current KISSsoft release, they give you the possibility to enhance and deepen your software knowledge and skills with regards to KISSsoft modules and functionalities.
Elgeti Engineering once again is offering its online bearing seminars for Spring 2024. Special packages are available for online 90-minute sessions.
CES 2024 is taking place in Las Vegas this week from January 9-12, 2024. While there's plenty of opportunities to find the latest gadgets in personal tech, the show has evolved through the years to include some key exhibitors in areas like aerospace, e-mobility, and automation/robotics.
The Power Transmission Distributors Association (PTDA) will host a new talent development event, the PTDA 2024 Industry Immersion Conference in Hollywood, Fla. on February 29, 2024. This intensive program is designed to help those who are new to the power transmission and motion control (PT/MC) industry grow the interpersonal skills, networking capabilities and industry essentials for building successful relationships with coworkers, executives and customers.
Motor & Drive Systems is focused on the latest technical advancements impacting the design, integration, and efficiency of motor, drive systems, and motion control for automation, robotics, manufacturing, and industrial, as well as utilities and automotive applications.
Randy Stott, publisher of Power Transmission Engineering and Gear Technology magazines, recently sat down with Norm Parker, technical fellow and technical manager for Torque Transfer Systems at Stellantis, to discuss bearing technology during the Motion + Power Technology Expo in Detroit.
At the recent PTDA Industry Summit, Sylvia Silveira, NTN Canada, was honored as the 2023 recipient of the PTDA Foundation Wendy B. McDonald Woman of the Year Award and Alex Vitou of Dodge Industrial, Inc. received the PTDA Foundation Robert K. Callahan Advancing Leaders Award.
Olympus Controls is now inviting manufacturing professionals to AT&T Stadium for ‘Waves of Innovation’ a unique event featuring live demonstrations of the newest automation and robotics solutions presented by veteran problem solvers ready to discuss attendees’ manufacturing challenges. Armenta looks forward to hosting more than 20 different automation companies showcasing a wide range of automation: from collaborative robots handling grueling sanding and polishing tasks, to vision-guided robotic arms picking up items using deep learning algorithms, along with applications for automated machine loading, laser marking, and much more.
The Power Transmission Distributors Association (PTDA) has named Chris Bursack the 32nd recipient of its Warren Pike Award for lifetime achievement in the power transmission/motion control (PT/MC) industry. He received the accolade during the PTDA 2023 Industry Summit on October 20 in Amelia Island, FL.
Bosch Rexroth recently announced the grand opening of its new Hydraulics Training Center which opened on Sept. 20 at 2315 City Line Road Bethlehem, PA. This state-of-the-art training center provides a dynamic space for individuals to embark on a journey of learning and growth.
The American Gear Manufacturers Association (AGMA) announced the promotion of Jenny Blackford to the organization’s Chief Operating Officer (COO) today. In her new role, Blackford will oversee the association’s systems and processes, enterprise wide. In addition, she will have expanded roles relative to human and technology resources and investments.
The award-winning magazine, beanz, bringing educational and inspirational content about science, technology, engineering, art and math (STEAM) to children, is celebrating its 10th anniversary (and 67th edition). Published by Kids Code & Computer Science, Inc, a 501(c)(3) nonprofit, beanz’ editorial team has produced award-winning magazines since 2013.
Bearing Specialists Association (BSA) and the Power Transmission Distributors Association (PTDA) announce the introduction of seals, linear bearings profile rail, bushings (hub fixing devices), chains and sprockets to the PIE Technology Platform (PIE).
The AD Bearings & Power Transmission community gathered in Charleston, South Carolina from August 15 to 17 for the group’s annual Network Meeting, strengthening connections and collaborating for mutual growth.
GT and PTE Presents "Ask the Expert Live," taking place October 17-18 during the Motion + Power Technology Expo at Huntington Place in Detroit.
This year, rather than focusing on gear basics or the more technical aspects of gear design and manufacturing, we’ve decided to address some of the issues that you’ve told us are most significant to you—the things you’re struggling with, the questions you’re hoping to find answers for, and the troubles that keep you up at night.
There are many ways we like to connect with our audience—in print (obviously), by e-mail, online at powertransmission.com, in person and via social media.
Hard work and good help can pay off, two young engineers have learned. Mixing undergraduate curiosity and real-world engagement together, two students from Colorado University (CU) Boulder Aerospace Engineering Sciences program, Zachary Lesan and Patrick Watson, started an independent effort on turbopump design and manufacture that is a lesson in determination and industry collaboration. Along the way, their project reinforced some significant points being made about next-generation rocketry.
Forest City Gear hosted a tour for students of the Gleason Gear School on September 20, 2023. For more than 70 years, Gleason Cutting Tools' school has led seminars in Rockford, IL on math, gear theory, and the required tooling, manufacture, and inspection of gears.
This year’s WEFTEC technical exhibition and conference will see Sulzer presenting several innovations in pumping, equipment control, filtration and aeration technology for the water and wastewater sectors. Exhibiting at Booth 3625 in the South Hall of McCormick Place in Chicago, IL., Sulzer’s water experts will be available from October 2-4 to discuss new advancements in energy efficiency, reliability and sustainability.
ABB Robotics is expanding its education offering with the launch of the IRB 1090. The 1090 industrial education robot, authenticated by the globally recognized education institute STEM.org, is designed to upskill students and provide them with a competitive advantage in securing employment. The new education robot forms a key part of ABB’s wider education offering, which includes additional industrial robots, as well as education packages, next generation controllers and market leading programming and simulation software.
Motion + Power Technology (MPT) show brings together the gear and power transmission industries for a unique balance of education, new technologies and networking opportunities. The show takes place October 17-19,2023 in Detroit.
The Canadian Manufacturing Technology Show (CMTS), Canada's largest industry event, makes its return at its new home – the Toronto Congress Centre – from September 25-28, 2023. Over 500 suppliers and original equipment manufacturers (OEMs), more than 8,000 manufacturing professionals and 250,000+ square feet of manufacturing excellence, housing 500,000+ pounds of live equipment are featured.
Gearmotors are used in processes to produce, manufacture, convey, package and store products used every day and are used frequently in small packaging applications due to their compact size. These units need care via preventive maintenance just like any asset used on a production site.
New research by market intelligence firm Interact Analysis shows that the ultra-low voltage motors market is experiencing a period of growth. By 2027 the market will be worth almost $6.5bn driven by demand from battery driven applications and a need for greater flexibility in manufacturing and logistics processes. The increased use of mobile robots is having a huge impact on the market for ultra-low voltage motors and, as a result of this, the supplier landscape will change significantly.
The most comprehensive packaging and processing event in North America this year, Pack Expo Las Vegas 2023 (Sept. 11–13; Las Vegas Convention Center), will be the largest in its history. Produced by PMMI, The Association for Packaging and Processing Technologies, Pack Expo Las Vegas will feature more than 2,000 exhibitors showcasing the newest innovations for more than 40 vertical markets, spanning nearly 1 million square feet of exhibit space.
HECO, Inc. is taking the ninth year of its Reliability Process Maintenance (RPM) Symposium on the road, bringing the educational, two-day conference to Lexington, Ky. The two-day symposium focuses on reliable industrial processes and is scheduled for Oct. 3-4 at The Campbell House, 1375 S. Broadway, Lexington, KY, 40504.
The Electrical Apparatus Service Association (EASA) honored Dennis Franklin, an Essex Brownell retiree, for the EASA Exceptional Achievement Service Award.
This review of Ref. 1 summarizes the conclusions of test data and numerical simulations showing that Stribeck curves for counterformal contact are different from Stribeck curves for conformal contact.
KISSsoft helped AGH Racing students in Poland develop steering column gears in the RTC7.0 race car powered by an internal combustion engine. Then they used the software to develop a gearbox for their new electric AWD drivetrain in the upcoming RTE3.0 car. Most importantly, they could optimize the micro geometry of the gears and analyze the influence of different factors on the durability of the gear tooth. KISSsoft made it easier to apply quick changes in the project, as it adapts other tooth geometry to the ones they were working on.
TPS, still organized by the Turbomachinery Laboratory at Texas A&M University, will gather for the 52nd Turbomachinery and 39th Turbo annual event from September 26–28, at the George R. Brown Convention Center in Houston.
Fred Young, 80, former president and CEO, Forest City Gear passed away on July 17, 2023. A graduate of Harlem High School, class of 1961, Young obtained his BA in English Literature from Rockford University, class of 1965, and went on to spend a year in the Navy Reserves. After spending nearly 40 years as an adventuring bachelor outdoorsman, he met the love of his life, Wendy Nutter, marrying her on the banks of the Wolf River on June 6, 1981. Fred’s greatest joys were his three daughters, whom he taught to always seek adventure, bestow kindness and generosity, treasure friendship, and work hard and play hard. Fred took over the family business, Forest City Gear, in 1967. Founded by his parents in 1955, Fred took the small mom-and-pop shop to a global level, leading the company to manufacture some of the world’s most difficult gearing for amazing end uses from NASA’s Martian rovers and space station to robotic arms and racing yachts.
It seems like everyone is jumping into the electric gearbox market. Even Schaeffler is in the electric drive module (EDM) market now with their own 800v system. With all these new entries, some companies are satisfied with following traditional bearing arrangements while some want new and unique solutions or some combination of both. There is heavy debate over which styles are the best. In this article, we will talk about the different types of 2-bearing arrangements for each shaft with the pros and cons of each for a simple three shaft, single speed parallel axis gearbox (ala Tesla style).
Festo Didactic recently provided SkillsUSA Championship Competition participants (Mechatronics Section) with advanced training technology at the 2023 National Leadership and Skills Conference June 19-23, Georgia World Congress Center and State Farm Arena, Atlanta.
Elgeti Engineering once again is offering its online bearing seminars for Fall 2023. Special packages are available for online 90-minute sessions.
Burckhardt Compression, a leading manufacturer of reciprocating compressors and a full-service provider, has received an exclusive Certificate of Apprenticeship from the U.S. Department of Labor to train and certify Laby Compressor Technicians. This recognition underscores the company’s commitment to enhancing the skills of its workforce and contributing to the broader industry.
Emerson Bearing, a Boston, MA-based bearing company catering to niche markets nationwide and the sister company of Action Bearing which serves the New England market, announces the availability of a complimentary E-Book and other online resources for Type E Mounted Bearings.
The FIRST Robotics competition is a global program that brings together students, parents, teachers, mentors and experts in science, technology, engineering and mathematics (STEM). Widely recognized as a great source of young engineering talent, many high-profile companies sponsor the event and use it to attract new employees. Burckhardt Compression has been supporting the 5409 Chargers team from Oakville, Canada since 2017 and this year they qualified for the world championships in Houston, TX.
The 2023 EASA Convention, June 25-27, at the Gaylord National Resort & Convention Center in National Harbor, MD. EASA (https://easa.com/convention) supports companies involved in the service and sale of electric motors, pumps, drives, controls, gearboxes and other rotating machinery. Highlights include synchronous motors, machine reliability, leadership, sustainability, EASA's 90th birthday bash, motor maintenance, pump repair, supply chain issues and more.
Visitors to EASA in June will get a chance to see some of the highest efficiency electric motors available on the market when they stop by the Nidec Motor Corporation Booth (#613). Nidec’s “Super Premium” and above variable frequency drive (VFD) motors and all-in-one, integrated motors and controls are leading the industry with efficiency ratings of IE 4 and IE 5 for remarkable energy savings compared to traditional single speed motors.
The Hydraulic Institute (HI), the largest association of pump manufacturers and suppliers to the pump industry in North America, and the global authority on pumps and pumping systems, installed new leadership during the 2023 Annual Conference in Tucson, Ariz.
Automate 2023 features educational tracks on everything from AI, smart automation, and innovations to AMRs and collaborative robots. The following article examines some of the key topics and presentations during the show.
Motion Industries, Inc. is pleased to announce the promotions of Joe Limbaugh to executive vice president – chief operations officer and James Howe to executive vice president – chief commercial officer/chief technology officer, effective June 1, 2023
The leading automation showcase in North America, Automate, is back in Detroit May 22-25, 2023, with the latest in cutting-edge robotics, vision, artificial intelligence, motion control and more. Produced by the Association for Advancing Automation (A3), Automate delivers the latest innovations in manufacturing automation technology from more than 600 leading exhibitors. Each day also offers inspirational keynote sessions and theater presentations to help attendees find the best solutions for their unique business needs.
Deutsche Messe is reporting 4,000 exhibitors in 2023 and 130,000+ attendees searching for the latest developments in electrification, sustainability, and digital solutions. While one might wonder if the show will ever reach pre-pandemic levels again, it was obvious there’s still a very focused global manufacturing network looking to solve climate, energy, and automation challenges in the coming years.
Hannover Messe 2023 provides the latest technologies in robotics, automation, motion control, IIoT, fluid power, e-mobility, material handling and more.
Three young and highly motivated women have made it to the finals. On Friday, April 21, 2023, one of them will be honored with the Young Engineering Award 2023 during the WomenPower Career Congress. The initiative is intended to boost motivation for women to take up a career in the STEM sector.
PTE will feature a variety of new component technologies online for bearings, motors, couplings, brakes, gear drives, and motion control systems leading up to Hannover Messe 2023 in Germany. Here is a preview of some bearings suppliers to check out if you're planning on attending the event online or in-person in April.
Industry 4.0 is an umbrella brand grouping together sensor manufacturers, automation companies, robotics builders, software producers and users. The term gave rise to a new enthusiasm for automation and thus also for the digitization of industrial processes – inspiring many young people to sign on at industrial enterprises as a result.
The American Gear Manufacturers Association (AGMA) has changed its board of directors. These changes took place at the 2023 AGMA Annual Meeting in Lake Buena Vista, Fla.
PTE will feature a variety of new component technologies online for bearings, motors, couplings, brakes, gear drives, and motion control systems leading up to Hannover Messe 2023 in Germany. Here is a preview of some couplings suppliers to check out if you're planning on attending the event online or in-person in April.
All throughout the booth at ProMat 2023, Sick (Booth #S3831) will present common misconceptions and present the actual truth about different types of technology. In addition to booth demonstrations, Sick experts will be presenting an educational session called, “Busting Myths: The Auto ID Episode.”
After five jam-packed days of innovative product launches and major company announcements, enlightening education sessions and countless networking opportunities, CONEXPO-CON/AGG & IFPE 2023 have come to a close, but not before taking the construction industry to the next level.
Priorities in the construction, off-highway and agriculture sectors seem to focus on longevity, energy efficiency and maximizing speed and torque. Every press conference and booth visit so far at IFPE and ConExpo support this claim. Components need to meet strict environmental guidelines while maximizing power. Success in these markets depends on condition monitoring technologies, quick-change components and the ability to meet power density requirements.
This year, the opening speech at the WomenPower Career Congress will be delivered by Dr. Ariane Reinhart, a member of the executive board at Continental AG – a company at which 25 percent of all management positions are slated to be filled by women by the year 2025. On this five-member executive board, two out of five positions are already held by women – a top figure among companies listed on the German DAX stock exchange.
Timken is helping fund the futures of 20 students in pursuit of careers ranging from economics and agriculture to medicine and education. In an awards ceremony last week, the company presented college scholarships to the children of Timken associates in the United States, China, India, Poland and Romania. Since the Timken Global Scholars Program's inception in 1958, The Timken Company Charitable and Educational Fund has awarded more than $26 million in scholarships to 815 students.
The International Fluid Power Exposition (IFPE), Las Vegas March 14-18, is where fluid power professionals meet to discover highly engineered solutions for improving mobile and industrial equipment's efficiency, performance, and sustainability. Attendees will also learn about the latest technology available to the industry and network to discuss and combat the most pressing industrial challenges.
PTE will feature a variety of new component technologies online for bearings, motors, couplings, brakes, gear drives, and motion control systems leading up to Hannover Messe 2023 in Germany. First up is a preview of some motor suppliers to check out if you're planning on attending the event online or in-person in April.
Electrification is changing the automotive industry wholesale. This online article looks at training and transmission technology courses available in the e-mobility sector today. Coursework includes examining gearbox structure to battery technology to health and safety issues. This expansion continues to prepare engineers, manufacturers, and technicians for the shift toward electric vehicles.
Automate delivers the latest innovations in manufacturing automation technology from more than 600 leading exhibitors. Each day also offers inspirational keynote sessions and theater presentations to help attendees find the best solutions for their unique business needs.
Hannover Messe 2023 presents the ideal networking hub. This is where AI developers, software engineers get together with users to jointly develop industrial-grade AI products or processes. Whereas in the past, the focus was on use cases in which errors or anomalies were detected or prognostications were made, industry in 2023 is focusing on the optimization of processes and the use of AI methods for simulation, testing and product development.
If you’ve watched any of the Star Wars/Disney+ series The Mandalorian, you’ve no doubt become familiar with the catchphrase “This is the Way,” often uttered by the main character and others who come from his home planet.
PT products such as gears, motors, pumps, fans and bearings will—without a doubt—continue to run through rigorous and harsh environments for the foreseeable future, but software and hardware improvements aim to disrupt unplanned downtime and machine maintenance through a series of new condition monitoring assets.
Danfoss (Booth #S80515) will demonstrate how the company is “Powering the future of machine performance,” during IFPE 2023.
AD is reporting record results for 2022 in owner/member sales, member purchases from AD suppliers, AD warehouse sales to AD members, net distributions to members, and operational efficiency.
NORD DRIVESYSTEMS will be exhibiting at this year’s CONEXPO–CON/AGG March 14th - 18th in Las Vegas, Nev. CON/AGG is North America’s largest construction trade show and creates one convenient place for attendees to learn about the future of construction technology and heavy-duty solutions from industry leaders. NORD’s construction solutions focus on reliability, high-efficiency, and versatility.
High energy costs, broken supply chains and rising raw material prices continue to pose new challenges to business. To remain competitive, companies need to take steps to increase their efficiency and contain energy costs, which in turn will lead to a reduction in their carbon footprint. High-tech solutions in this area will be presented at Hannover Messe.
Indonesia is this year’s Partner Country at Hannover Messe. Indonesian President Joko Widodo has confirmed his personal attendance at the world’s leading industrial trade fair and will speak at the opening ceremony in April. In addition, together with German Chancellor Olaf Scholz, he will also take part in the traditional chancellor’s tour the next day – opening day Monday – at the fair. The last time these two heads of government met was at the G20 summit in Bali, Indonesia, in November 2022.
Siemens Digital Industries Software recently announced the opening of eXplore Live at The Smart Factory @ Wichita, an experience center convened by Deloitte that marries an ecosystem of world-leading organizations with business strategy and cutting-edge technology to demonstrate Industry 4.0.
Bearing Specialists Association (BSA) and the Power Transmission Distributors Association (PTDA) announce the launch of the PIE Technology Platform (PIE), a cloud-based platform giving manufacturers and distributors of industrial products access to the most comprehensive catalog for the exchange of rich content product information.
The recently elected 2023 Board of Directors and Manufacturer Council of the Power Transmission Distributors Association (PTDA) begin their leadership terms.
Interact Analysis have recently released the 3rd edition of the Geared Motors and Industrial (Heavy-Duty) Gears report. This market study covers finished geared motors and gearboxes for general industrial use, including light- and heavy-duty products, as well as planetary gears, with the exclusion of precision gearboxes and loose gear parts. In this edition, amidst global macroeconomic uncertainty, market trend projections have become more volatile compared to previous years.
For optimal gear design in accordance with requirements, it is essential to consider load spectra under the most realistic conditions possible as early as the virtual basic design phase. This is the only way to ensure that all components are loaded as evenly as possible to avoid overdimensioning.
Optimized design saves resources and costs and improves the CO2 balance – an aspect that is becoming increasingly important in the current environment and can offer a competitive advantage. Load spectrum calculations are also important for replacing complex time and cost-intensive experiments by simulating test rig damage tests.
The Electrical Apparatus Service Association (EASA) announces its Spring 2023 training seminar schedule. Offered in various locations around the United States, EASA's industry-specific training pools more than 100 years of rotating equipment knowledge from EASA's technical support staff. Participants have an opportunity to interact face-to-face with the presenters, as well as each other.
On Wednesday, November 16 and Thursday, November 17, the Reggio Emilia’s plant of Kohler Engines sponsored and hosted the event "Alternative Fuels. A sustainable path to engines decarbonization", a workshop organized by SAE-NA, STEMS-CNR and Kohler.
Overall, the Turbomachinery & Pump Symposia saw 3,815 attendees, hosted 94 technical sessions, and had 274 exhibiting companies. Many attendees commented on the value of networking conversation at the show. From 2021 to 2022, TPS saw an increase in international delegates, with just 19 countries represented in 2021, to 44 countries represented in 2022. Below is a taste of the booths we had the chance to visit.
With over 200 years of combined experience, Interact Analysis is the market intelligence authority for global supply chain automation. Our research covers the entire automation value chain – from the technology used to automate factory production, through inventory storage and distribution channels, to the transportation of the finished goods. The world’s leading companies trust us to surface robust insights and opportunities for technology-driven growth.
The PTDA Foundation, whose work is funded solely by donations, was founded in 1982. Its core purpose is to champion education, outreach and research initiatives relevant to the PT/MC industry that enhance the knowledge and/or professionalism and productivity of industry stakeholders.
The LEGO Group marked International Day of the Girl on October 11th with a new campaign to encourage girls to stay curious about STEAM subjects and careers. New and sobering statistics from the Geena Davis Institute on Gender in Media and the LEGO Group show girls are still discouraged from STEAM fields from a young age when play is often gender stereotyped.
Pack Expo International is produced by PMMI, the Association for Packaging and Processing Technologies. North America’s largest packaging event will bring together the solutions needed to launch new products and solve production issues. This article is PTE's second round of booth previews prior to the show.
AD Bearings & Power Transmission welcomed over 140 member and supplier partner attendees to its annual Network Meeting from August 23-25 in Frisco, Texas. The meeting brought the division’s members and suppliers together to discuss industry trends, celebrate a year of growth and collaboration, and learn about important divisional updates.
Employees from Forest City Gear recently attended the 2022 International Manufacturing Technology Show (IMTS) at Chicago’s McCormick Place Convention Center. This year’s show attracted more than 86,000 registrants looking to experience the latest and greatest in manufacturing technology.
Emerson announced the recipient of its 2022 ASCO Engineering Scholarship Program, which recognizes and rewards U.S. college and university students studying in the fields of engineering, instrumentation, systems, and automation, for their academic excellence, service to others, and leadership potential.
Motion Industries, Inc. is pleased to announce the launch of the new Motion Ai website, https://ai.motion.com. Announced in February 2022, the Motion Ai business group unifies acquired technical companies, including Applied Machine and Motion Control (AMMC), Axis New England/Axis New York, BRAAS, F&L Industrial Solutions, Integro Technologies, Kaman Automation, Meier Transmission and Numatic Engineering.
For more than 30 years, the Schaeffler Symposium has stood for innovation, customer focus and the open exchange of ideas. The 12th Schaeffler Symposium, the ninth event of its kind to take place in the U.S., will be held in two venues this year: in Detroit on Sept. 8 and, for the first time ever, in Silicon Valley on Sept. 21-22. This year’s Symposium will focus on transformation and “Energizing the Next Generation.”
Elgeti Engineering once again is offering its online bearing seminars for Fall 2022. Special packages are available for online 90-minute sessions.
Finding employees in today’s labor market isn’t getting any easier. With quit and retirement rates near all-time highs, demand for qualified employees is outpacing labor supply. Two added resources from the PTDA Foundation’s PT WORK Force initiative can equip employers with essential tools to attract and retain top talent.
The Power Transmission Distributors Association (PTDA) will convene for the PTDA 2022 Industry Summit in Nashville, Tenn. on October 27-29, 2022. With more than 500 delegates in the power transmission/motion control (PT/MC) industry expected to attend, representing over 200 PTDA distributor and manufacturer companies, the Industry Summit—themed “Amp Up”—will offer cross-channel networking, shared learning and collaborative experiences.
With Sinumerik One, the first digital native CNC for machine tools, Siemens works with software to create the machine controller and the associated Digital Twin from one engineering system seamlessly. The latest iteration of the CNC system was on display recently at Automate 2022 in Detroit where machine tool builders and CNC users were able to witness the product, production, and performance benefits on the show floor.
ABB opened its new global innovation and training campus at the headquarters of B&R in Eggelsberg, Austria, its global center for machine and factory automation. The new campus will create up to 1,000 additional high-tech jobs and includes world-class research and development laboratories, as well as global training facilities for up to 4,000 people per year in collaboration with universities. ABB invested EUR 100 million in the expansion of the B&R headquarters.
Visit the ABB Booth #603 at the 2022 EASA Convention in St. Louis, June 26-28 to meet experts, view innovative solutions, and to learn why selecting the right motor is important.
Showcasing its engineering capabilities for the electric motor repair industry, global industrial and automotive supplier Schaeffler is presenting an array of advanced solutions for manufacturers and rebuilders of electric motors at the EASA 2022 Convention & Solutions Expo in St. Louis.
Automate 2022 in Detroit offered the latest and greatest in automation, robotics, and motion control technology. The perception that automation will threaten the livelihood of shop floor personnel is slowly giving way to the idea that these tools and resources will transform shop floors and keep companies up and running.
Charging power. Infrastructure. Longer battery life. Every time the industry comes together for the CTI Symposium, we get a clearer picture of the technology development toward our electric future.
The latest trends and emerging technologies in areas like robotics, automation, mechatronics and motion control will be on-hand at Automate 2022 in Detroit. The following is a preview of some of the products that will be available on the show floor in June:
Automation has never been easier, more cost-effective, or more powerful than it is today. But as with any journey, you need to take the first steps to arrive at your destination. You need the right plan and the right partners to be successful. "Getting Started with Automation" is a free A3 webinar taking place May 17, 2022, from 10:00 - 12:30 pm ET.
The PTDA Foundation is seeking nominations for its Wendy B. McDonald Woman of the Year Award and Robert (Bob) K. Callahan Future Leaders Award, respectively. As the charitable arm of the Power Transmission Distributors Association, the PTDA Foundation champions education, outreach and research initiatives relevant to the power transmission/motion control (PT/MC) industry that enhance the knowledge and/or professionalism and productivity for industry stakeholders.
The PTDA Foundation, through its PT WORK Force initiative, provides programs and resources to help power transmission/motion control (PT/MC) employers address ever-escalating issues surrounding recruitment and retention.
The gear and gear drive segment of mechanical power transmission continues to focus on performance, reliability and safety. There are several new products offering increased load capacity, reduced friction and longer service life. For those components unable to keep up with industrial demands, there’s a gearbox MRO team waiting to handle emergency repair services.
Manufacturing is facing constant challenges stemming from labor shortages and disrupted supply chains to productivity declines and the high replacement and maintenance costs of legacy equipment. Trends today include equipment upgrades, e-commerce, a push for more robotics and automation and faster software and IIoT solutions.
Heidenhain Education Support Program (HESP) promises to bring the latest advancements on the shop floor to current classrooms of vocational training centers, universities, and corporate trainee programs.
Power Transmission Engineering has your in-depth knowledge and expertise covered in terms of bearings, motors, drives, gears and motion control technologies. Here are some of the latest articles on bearing innovations: