Collaborative robots have been hugely beneficial for manufacturers of all sizes over the past 15 years, and their share of the total robot market continues to grow every year. As of 2025, hundreds of different cobot models are available from dozens of manufacturers. Today, we will discuss the differences between industrial and collaborative robots, advantages of cobots, typical cobot applications, case studies, and some specific robotic solutions.
North American robot orders climbed in the third quarter of 2025, signaling renewed momentum in manufacturing automation. According to the latest data released by the Association for Advancing Automation (A3), 8,806 robots valued at $574 million were ordered in Q3, an 11.6 percent increase in units and 17.2 percent rise in revenue compared to the same period last year.
At SPS Nuremberg, Bonfiglioli is showcasing its comprehensive ecosystem of mechatronics, combining gearmotors, inverters and sensors with automation software tools. A special focus is given to the newly expanded Axia drive family, while five mechatronic packages dedicated to applications for rolling conveyor, palletizer, flowpack, compact warehouse elevator and material handling complete the range displayed at the exhibition.
Cortec Corporation is a long-time proponent of corrosion solutions that reduce environmental impact. One of those eco-conscious methods of metals protection is EcoShield VpCI-144 Paper, a corrosion inhibiting paper with a recyclable barrier coating. Recently, Cortec has taken this technology to the next level of sustainability with EcoBio VpCI-144 Barrier Paper, a new version with the added benefit of a biodegradable, biobased barrier coating.
Bonfiglioli returns to Agritechnica 2025 reaffirming its commitment to innovation, sustainability and close collaboration with OEMs shaping the future of agriculture. Bonfiglioli is showcasing its most recognized solutions for agricultural robots and machinery – particularly for sprayers and feed mixers – while also highlighting a key technological evolution: the electrification of small autonomous agricultural vehicles and attachment drives. This segment has seen significant growth since the last edition of Agritechnica, particularly in France and Italy, and is expected to gain momentum globally.
Attracting a diverse range of professionals, including executives, engineers, designers, and entrepreneurs, CES (Las Vegas) is an excellent opportunity to connect, collaborate, and grow your professional network. Keynote addresses and panel discussions from industry experts offer valuable insights into market trends, consumer behavior, and emerging technologies that can help guide strategic decisions and future planning.
The difference between a smooth-running drive and constant headaches? The right timing belt and pulley plus a whole lot more. Discover what works, what doesn’t, and put your design skills to the test—engineer your best system yet!
Pack Expo Las Vegas, one of North America’s most comprehensive packaging and processing events is celebrating a milestone: 2025 marks 30 years since the show’s debut. Today, Pack Expo Las Vegas continues to be a global hub for industry innovation and collaboration. Show producer PMMI, The Association for Packaging and Processing Technologies, has elevated Pack Expo Las Vegas from a regional trade show to a global industry force—expanding its scale, influence, and relevance across international markets. This year, the show spanned over 1 million net square feet, featuring 2,300+ exhibitors.
This banded version of “The Energy Saver” combines the longer life and superior performance of the Gold-Ribbon Cog-Belt with the stability of a banded belt. It provides excellent service life in harsh environments and high shock load conditions. The unique construction combines the superior flexing of precision molded cogs with the tenacious gripping power of raw edge sidewalls. Gold-Ribbon Cog-Band is designed to achieve longer belt life, higher efficiency and higher horsepower ratings. It’s an ideal choice for applications where increased horsepower or speed is required. The reinforced band across the top of two or more individual v-belts greatly enhances stability by preventing the belt from turning over or jumping off the drive.
Electric drives in industrial applications consume up to 70 percent of the total energy required, creating great potential for optimization. Nord Drivesystems meets these demands with a range of powerful, energy-saving electric motors including asynchronous, synchronous, explosion protected, and smooth body versions. These motors are built in-house for high availability, deliver high-efficiency, and meet all common global efficiency regulations and standards. Thanks to the modular design, they are compatible with the full Nord gear unit and variable frequency drive portfolio and can also be used as stand-alone motors.
Modex (Atlanta) is where the manufacturing and supply chain professionals come together for the world’s largest supply chain experience. From hands‑on product demonstrations to one-on-one meetings and a conference with four keynotes and nearly 200 sessions, Modex 2026 is where they come to see the latest equipment and tech, learn the latest trends, connect with key suppliers and make strategic capital equipment buying decisions for their future operations. Key exhibitors include Beckhoff Automation, Festo, Interroll, Lenze, Misumi, Motion, Nidec Automation, Nord Drivesystems, Regal Rexnord, Siemens and more.
Stäubli has announced the appointment of Adrien Brouillard as executive president of its Robotics division, effective September 5, 2025. Brouillard has successfully served in the role on an interim basis in recent months and will now lead the division's global strategy and operations.
Dunkermotoren is proud to unveil its latest innovation: dSafe, a cutting-edge product line that sets new standards for integrated functional safety in motor drive systems. Expanding on the
existing portfolio (dGo, dMove, dPro), dSafe brings advanced safety features like secure communication and safe motion profiles—fully embedded into the BG75 and BG95 brushless DC motor series.
Pack Expo Las Vegas is celebrating a milestone: 2025 marks 30 years since the show’s debut. Today, Pack Expo Las Vegas continues to be a global hub for industry innovation and collaboration. Show producer PMMI, The Association for Packaging and Processing Technologies, has elevated Pack Expo Las Vegas from a regional trade show to a global industry force—expanding its scale, influence, and relevance across international markets. This year, the show will span over 1 million net square feet, feature 2,300 exhibitors, and expects to attract 35,000 attendees from more than 40 vertical markets.
Pack Expo Las Vegas, one of North America’s most comprehensive packaging and processing events is celebrating a milestone: 2025 marks 30 years since the show’s debut. Today, Pack Expo Las Vegas continues to be a global hub for industry innovation and collaboration. Show producer PMMI, The Association for Packaging and Processing Technologies, has elevated Pack Expo Las Vegas from a regional trade show to a global industry force—expanding its scale, influence, and relevance across international markets. This year, the show will span over 1 million net square feet, feature 2,300 exhibitors, and expects to attract 35,000 attendees from more than 40 vertical markets.
The Bluefield Coal & Mining Show is an iconic name in the industry and has supported the coal industry for very nearly 50 years. Some 6,000 visitors are expected to converge on Bluefield, WV. The show is a vital part of the area’s blue-collar history and connects the working personnel to the latest mining innovations in today’s industry. The show is a time for celebrating the mining industry and for providing connectivity between the buyers and sellers. Highlights include live interviews, networking opportunities, live demonstrations, and the latest mining technology and equipment.
Smart Production Solutions - SPS Atlanta brings together manufacturers and distributors of the industrial automation industry from components, machinery, equipment, technology, and other services for three days of education, networking and business development. SPS provides a comprehensive look at smart and digital automation including drive systems and components, sensors, controls, software, HMIs, communication systems and more.
Electromate Inc., Canada’s exclusive distributor of Maxon precision mechatronic components, announces the release of the HEJ 70 High-Efficiency Joint actuator. This compact, fully integrated robotic joint actuator is engineered to meet the demanding performance needs of mobile and manipulation robots.
The F-690.S1 is built on a unique hybrid kinematic design featuring three symmetrically arranged XY nanopositioning stages with direct-drive linear motors and cross-roller bearings. Each stage supports a linear bearing mounted on a wedge with ball-joint connections, enabling full 6-degree-of-freedom motion (X, Y, Z, pitch, yaw, roll) with smooth coordination and minimal mechanical crosstalk.
IKO International has introduced the PD…S X-Y parallel drive stage that removes the barriers that often exist in the work area during equipment design. With the PD…S, machine designers can achieve highly accurate positioning without sacrificing workability and performance.
Food and beverage manufacturers face unique challenges in ensuring precision, hygiene, and reliability in their equipment. Ruland’s shaft collars and rigid couplings are engineered and manufactured to meet the demanding needs of food processing, packaging, and handling systems, offering solutions that enhance efficiency and reduce downtime.
Swanson Industries, Inc. has acquired the Off-Highway Business of TransAxle Holdings, LLC. The Off-Highway Business is a premier U.S.-based remanufacturer of transmissions, differentials, hydraulics, axles and brake systems, and related industrial products for numerous off-highway verticals.
ABB Robotics’ IRB 1200 high performance small robot family is evolving into a new generation that is faster and more precise, improving productivity and efficiency for a wide range of applications.
Pack Expo Las Vegas features targeted pavilions or “shows within a show” featuring solutions that address many industry challenges. All of the pavilions have expanded, reflecting the tremendous market growth in packaging and processing.
Bosch Rexroth is expanding its CKR series of compact modules with an innovative dual belt axis for dynamic handling with a total load capacity of up to 770 kg. The new CKR-280 heavy-duty axis combines the functions of two linear axes into one linear system. Two, independently driven carriages in a single frame enable dynamic applications with high drive torques and short cycle times.
Universal Robots (UR) presents UR Studio, a powerful online simulation tool built on PolyScope X, UR’s most advanced, open and AI-ready software platform.
ABB is extending its leadership in AI-powered autonomous mobile robotics with the launch of the Flexley Mover P603 platform AMR, the most compact model in its class to handle payloads of up to 1500 kg. Designed to boost intralogistics efficiency, the P603 combines compact design with AI-driven Visual SLAM navigation and the latest version of AMR Studio software that maximizes flexibility by enabling different modules to be integrated into the AMR.
Whether it’s pressing, forming, riveting, tensioning, positioning or testing, there are numerous processes in which linear movements with high forces must be performed precisely and energy-efficiently. As such, Bosch Rexroth is expanding the electromechanical cylinders in the EMC-HP high-power series to include sizes 190 and 220.
The NORD ECO Service is designed to optimize existing installations to find the best drive solution for the system. The NORD ECO BOX is installed between the drive and power supply and takes measurements over a period of at least two weeks, recording real-time data on permanent loads, load peaks, and irregular conditions.
As the industrial world becomes increasingly connected, the designer’s need for intelligent components that can communicate with each other and operate without the need for manual interaction is growing. Thomson, a trusted manufacturer that has always been committed to staying ahead of the technology curve, is meeting this demand and helping to usher in a new generation of smart actuators.
Continental’s group sector ContiTech recently hosted its Total Conveyance Event in celebration of the expansion of its conveyor belt manufacturing facility in Ponta Grossa, Paraná, Brazil. The two-day event featured a ribbon-cutting ceremony and welcomed approximately 100 guests, including customers, industry professionals and local leaders.
Igus has introduced a new e-chain system, “glide-chain,” designed specifically for gliding applications with extended travel distances. The innovative glide-chain G4.42, presented at Hannover Messe, is optimized for indoor cranes and similar applications with travel lengths up to approximately 98 feet (30 meters). The product’s streamlined design offers substantial cost reductions of 30 to 40 percent.
A line of shaft collars, flange collars, and rigid couplings offered in large sizes for building and repairing all types of heavy equipment has been introduced by Stafford Manufacturing Corp. of Wilmington, MA.
Kollmorgen announces the launch of the AC7 and DC7 Motor Controllers, a powerful new generation of AC and DC motor controllers engineered for AGVs and AMRs. With this innovation, Kollmorgen delivers the performance, durability, and integration flexibility demanded by today's most advanced autonomous vehicle applications.
FLS has inaugurated its new manufacturing facility for mill liners and related products in Casablanca, Chile, an important investment supporting the company’s strategic focus on mill liners in line with its CORE’26 strategy and MissionZero sustainability ambitions.
Solutions for handling small parts must be compact, cost-effective, and quick to implement. Bosch Rexroth’s space-optimized SMS screw-driven small modules, which are available from stock, now have fully configured drive and connection elements. New high-performance stepping motors with integrated drive controllers significantly shorten commissioning thanks to pre-parameterization, which is carried out without any additional tools using the onboard controller. A multi-Ethernet interface with an EtherCAT communication profile provides the necessary connectivity and with the ctrlX CORE open control platform, Bosch Rexroth also provides users with a suitable control solution as an optio
Electromate is expanding its lineup of collaborative automation solutions with the addition of three advanced models from Universal Robots: the UR7e, UR12e, and UR15. These robots provide enhanced options for payload, reach, and precision in demanding collaborative applications.
DBS Australia has achieved a recommended certification to ISO 45001:2018 and continued certification to ISO 9001:2025 and ISO 14001:2015. The scope of the audit included Quality Management System’s Standard for Perth, Mackay and Bulli sites.
Interroll will display its material handling solutions at Booth #852 at Automate 2025 including drum motors, conveyor systems, drives and more. Drum motors provide customers with a solution for hygienic environments and play key roles in airports, distribution centers and more. Attendees will learn why belt conveyor and conveyor drive system operators rely on Interroll drum motors. The Belt Curve is a solution for baggage handling. They are also heavily utilized in distribution centers, courier and postal facilities, as well as manufacturing plants. Modular Conveyor Platform (MCP) offers reliability, ease of installation and versatility, Interroll MCP is sought after by countless facilities.
ABB Robotics will unveil a powerful lineup of robotic demos at Automate 2025, May 12-15 at Huntington Place in Detroit (Main Booth #2632; Education Pavilion #8614), showcasing its new OmniCore controller — a transformative control platform delivering faster, more precise and more autonomous automation across ABB’s entire robot portfolio.
With ‘physical AI,’ artificial intelligence is moving out of its digital confines to power robotic applications with humanlike perception, creating solutions that can handle variation without prior teaching or programming. Nowhere is that more pronounced than at this year’s Automate show in Chicago, May 6-9, where more than 50 Universal Robots throughout the show floor will demonstrate new capabilities – many of them fueled by AI.
Nord Drivesystems is bringing their innovative airport technology solutions to the 97th Annual AAAE Conference and Exposition. This year’s show will be held June 8 – 10, 2025 at the Georgia World Congress Center (GWCC) in Atlanta, GA. Nord offers highly configurable drive systems to precisely meet every application need whether for baggage handling systems, jetways, walkways, large hangar doors, and more. Their solutions are utilized throughout airports worldwide with focus on efficiency, reliability, reduced maintenance, and overall cost savings.
AMMEGA Group, global provider of belting solutions for conveying and power transmission, announced that their premier industry event, The Belting Technology Conference (BTC), is returning from May 12-14, 2025, at the Chateau Elan Resort & Conference Center in Braselton, GA. Building on the strong foundation set by the previous event in 2022, this year’s BTC promises an even more dynamic and interactive experience, bringing together a larger audience of industry professionals, thought leaders, and innovators in conveying and power transmission. Registration for the event is open and includes access to two keynote speakers, over 20 breakout sessions, manufacturing tours, belting expo, panel discussions and several networking opportunities.
Today, there’s no longer any doubt that electric drive systems will make inroads into construction sites in the future. Some local governments in Germany and other countries are already banning vehicles with combustion engines from susceptible urban areas. At bauma 2025, Schaeffler presented its new high-performance heavy-duty electric motors as a volume production-ready solution for electric-only and hybrid drive systems. Due to their design, they achieve especially high torques, a power-to-weight ratio (peak) of around 5 to 7 kW/kg, and maximum efficiencies of more than 97 percent in a speed range of 3,000 to 8,000 rpm. The low losses of the liquid-cooled drive motors are essential to allow long operating times between charging cycles on construction sites and ensure efficient use of energy. Minimal losses and high operational reliability were also particularly important factors for the design of the bearing and seal. Ceramic balls reduce friction and prevent damaging passage of current.
Miki Pulley Magnetic Couplings are shaft couplings that transmit torque from one shaft to another using a magnetic field instead of a physical or mechanical connection. These Magnetic Couplings are non-contact and rely on the attraction and repulsion of magnetic poles to generate rotational power.
Intralogistics is transforming modern industry, becoming one of the fastest-growing markets. As businesses optimize processes, demand for innovative, efficient, and reliable solutions rises. Trust Regal RexnordTM to power your intralogistics operations with our reliable, energy-efficient gear drives and gear motors. Experience the difference and elevate your business to the next level.
Automation has become a key driver of efficiency and productivity, regardless of industry. Among the most popular automation solutions are automated guided vehicles (AGVs) and autonomous mobile robots (AMRs). While both technologies automate and enhance material handling and reduce manual labor, there are key differences in their functionality, flexibility, and areas of application that set them apart.
Automatica 2025 (Munich) examines how robotics and smart automation is changing the future. Focus topics include digitalization and AI, sustainable production and workforce development. Apart from concrete practical applications and product innovations, attendees can exchange ideas with key players and industry experts. Showcases include mobile robots, service robots, smart maintenance, AI technology, connected machines, testing, startups and more.
Igus introduces the DR1000 four-axis delta robot that combines high speed and precision for demanding industrial applications.
SEW-Eurodrive has launched the DR2C motor, an IE5 ultra-premium efficiency motor engineered for wide speed range operation and maximum long-term energy cost reductions. Designed for industries focused on minimizing total cost of ownership (TCO), the DR2C reduces energy consumption, minimizes heat losses, and enhances operational reliability—delivering a fast return on investment and sustained savings throughout its lifecycle.
With the launch of the new Parts Shop, which will replace the ten existing shops, Liebherr is standardizing the extensive range of spare parts. From March 10, 2025, the Parts Shop is pooling together the entire range from all product segments, including earthmoving, material handling technology, deep foundation, maritime cranes, mobile and crawler cranes, tower cranes, concrete technology, gear technology, automation systems, mining and components, in one central location.
The new KR Iontec ultra completes KUKA's portfolio in the payload range of 80 to 120 kg. With a reach of 2,300 to 2,700 mm, this compact and powerful robot offers maximum efficiency and flexibility in the modern production environment – for example in handling or spot welding with lightweight welding guns.
ABB has appointed Susana Gonzalez as chief sales officer, machine automation division, B&R (A Member of the ABB Group), effective February 2025. Gonzalez, who has over 25 years of global experience in industrial automation and manufacturing, will lead B&R's global sales organization and serve as a member of the division management team. She succeeds Luca Galluzzi who held the position for the past five years.
IKO is pleased to announce its LT170H2 direct drive linear motor stage for dynamic applications such as semiconductor fabrication which require high thrust forces and long strokes.
The mining industry relies heavily on efficient and reliable equipment to process large volumes of ore and mineral resources. One critical component in this ecosystem is the grinding mill, which plays a pivotal role in comminuting materials to prepare them for further processing. Grinding mills, particularly the large semi-autogenous (SAG) and ball mills, often operate under challenging conditions that demand precision, durability, and adaptability. A key technology enabling these mills to operate safely and efficiently is the hydraulic inching drive system.
Between trade shows including MINExpo and CES 2025, we’ve been treated to a great deal of new technology in areas like mining, agriculture, construction and heavy industrial components. Liebherr has modified its component portfolio to include digital measurement, electrification and maintenance-free technologies. Liebherr’s component product segment offers advanced solutions for slewing bearings and slew drives that meet the rising demands across a variety of applications and industries. These components are future-ready and play a vital role in making operations much more efficient.
For every online retailer, warehouse logistics is part of the critical infrastructure: If the conveyor lines come to a standstill, it generally won’t be possible for any more packages to get out. To prevent this, an Australian office equipment supplier has retrofitted the warehouse logistics installation of its central warehouse. In its role as project manager, Layer Seven Automation replaced the proprietary decentralized controllers of the conveyor lines with PC-based control from Beckhoff, based on powerful EtherCAT communication.
The Bearing Show North America 2025, colocated with Lubricant Expo North America 2025 takes place March 18–20 at Huntington Place in Detroit. The Bearing Show connects the evolving needs of bearings end-users with the latest technologies serving OEM development, maintenance professionals and R&D engineers.
The North American robotics market demonstrated minor overall growth in 2024, reflecting resilience and adaptability as automation strengthened its role across industries. According to new data from the Association for Advancing Automation (A3), North American companies ordered 31,311 robots valued at $1.963 billion, representing slight increases of 0.5 percent in units and 0.1 percent in revenue over 2023. These modest gains mark stabilization after years of volatility and record-breaking growth.
500+ manufacturing professionals from across North America, automation specialists, educators, and industry thought leaders from MIT, Siemens, and the Association for Advancing Automation (A3) recently came together for Universal Robot's Collaborate 2025 event in Novi, MI.
The Timken Company recently announced the appointment of Kimberly K. (Kim) Ryan to its Board of Directors. Her election increases The Timken Company Board to 13 members.
Motion Industries, Inc. has signed a definitive purchase agreement to acquire the operating assets of U.S. based International Conveyor and Rubber (ICR). The transaction is expected to close at the end of December 2024, subject to customary closing conditions.
There’s a delicate balance in the constant evolution of today’s assembly line. Once dominated by hydraulics, manufacturing floors are incorporating a growing number of electromechanical solutions to supplement legacy hydraulic components, particularly in lower force, linear motion applications. Manufacturers that recognize this trend and harness the benefits of both hydraulic and electromechanical solutions position themselves to optimize future operations, regardless of market trend demands.
Nord Drivesystems is showcasing their modular drive solutions for high-volume packaging applications at Pack Expo 2024.
Global technology, software and engineering leader Emerson will exhibit its latest Floor to Cloud packaging solutions at Pack Expo Chicago, November 3-6, 2024. Advancing the boundless future of automation, Emerson factory automation solutions and its Floor to Cloud approach empower smarter packaging lines and more efficient processes that make it possible for manufacturers to continuously improve plant productivity, sustainability and safety.
In recent years, the power engineering manufacturing industry has been undergoing a significant modernization movement, driven by the rapid advancement of robotics, automation, and artificial intelligence. Amazon's recent announcement of its in Shreveport, Louisiana, serves as a prime example of this revolution in action.
Bosch Rexroth will display product technologies and complete factory automation solutions for CPG manufacturing in Booth S-1548 at Pack Expo 2024, November 3-6, in Chicago, Illinois.
Ruland Manufacturing has expanded its jaw coupling line to meet the demands of high-torque applications, now offering bore sizes up to 1-3/4 in or 45 mm and torque capacities of 2,655 in-lbs. (300 Nm). These new jaw couplings are designed for use in precision systems with high deceleration and acceleration curves, such as those found in semiconductor, solar, conveyor, and warehouse automation applications.
The S-17-85 Series of “C” Frame Pull Type Solenoids from Magnetic Sensor Systems (MSS) includes 18 different solenoids to select from based on the Voltage, Duty Cycle, Attractive Force (up to 91 oz) and Stroke length requirements of the user. MSS Solenoid coils typically utilize 23 to 40 AWG (American Wire Gauge) windings with Class “F” insulation for better protection of the solenoid during longer duty cycles. Operating voltage range is from 3.0 VDC to 429 VDC, and from 5 to 40 Watts.
Explore cutting-edge robotic solutions designed to optimize your packaging operations, enhance efficiency, and boost productivity. From palletizing to picking and packing, Yaskawa (Booth #N-5736) collaborative and industrial robots deliver precision and flexibility for any job.
In today's fast-paced production environments, picking and packing operations demand uninterrupted speed, reliability, accuracy and dexterity—all while maintaining critical food safety. Built with the highest quality standards to ensure unparalleled precision, FANUC cobots and robots deliver reliability and accuracy that minimizes error, reduces product waste and enhances overall quality control.
Mantis, a provider of warehouse management and logistics solutions, is delighted to announce the appointment of Nikos Silivestros as its new CEO. Silivestros possesses extensive experience and a proven track record of driving organizational growth and leading teams to notable achievements, particularly within the supply chain industry.
ABB Robotics has launched Ultra Accuracy, a new feature for its GoFa cobot family that delivers the highest level of precision available in cobots, enabling over 10 times greater path accuracy vs. other cobots on the market.
KUKA now offers a mobile platform that is particularly suitable for confined production environments: the KMP 600P. As one of the world's leading specialists for automation solutions, KUKA is expanding its portfolio in the field of autonomous mobile robots (AMR) with an attractive option for payloads of up to 600 kilograms.
Applied Motion Products introduces the CPBD-A-C remote control module that connects to the back of the CSM34 Conveyor Smart Motor and can be mounted where conveyor operators can easily access it.
The company Norelem, a global manufacturer and supplier of standard components for mechanical engineering and industrial applications, is set to open a new facility in the United States. This expansion represents a significant step in Norelem's international growth strategy and its commitment to better serving its customers in the United States.
The manufacturing industry often sets the trends for technology adoption in industrial settings. For example, the automation journey began a half-century ago with the first industrial robot — a 2,700-pound behemoth Unimate prototype — installed in a GM factory in 1959. Since then, robotics technology has significantly evolved and expanded beyond traditional manufacturing. Today, robots are integral to various industries, undertaking tasks like automated bricklaying in construction, efficient goods handling in logistics and warehousing and critical functions such as dispensing medication within hospitals.
ABB has launched its new OmniVance Collaborative Machine Tending Cell, providing a complete integrated solution for automated machine tending that is easy to program, install and use. The standardized solution combines a collaborative GoFa 12 robot and user-friendly software in a compact solution for fast installation and easy operation.
LogiDrive complete drive solutions from Nord Drivesystems reduce planning and commissioning efforts through cost-effective, standardized designs engineered to industry standards and application requirements. These solutions are especially well suited for post & parcel, airport, and warehouse logistics as they are specifically aligned with the intralogistics and material handling requirements of these industries.
In major ports around the world, there is a growing need for autonomous goods handling. The vehicles in the ports, which are operated around the clock and have largely been manually operated.
Overall global industrial robot shipment volumes exceeded 500,000 units in 2023, according to global market research firm Interact Analysis. This was a similar level to that seen in 2022 but the average price of industrial robots decreased last year. After a record high in 2021, 2023 reached a low point in terms of revenues and shipments but the long-term forecast remains positive. The global industrial robot market is expected to grow on average, by 3.7 percent per year between 2024 and 2028.
ABB Robotics has announced its first Flexley Tug T702 autonomous mobile robot equipped with AI-based Visual SLAM navigation technology and the new AMR Studio software, enabling first-time robot users to easily program and operate entire fleets of mobile robots. The new capabilities simplify configuration and can reduce commissioning time by up to 20 percent, paving the way for a workplace where intelligent robots operate autonomously, amid a critical shortage of skilled labor.
Almost 43,000 registrants came together in Chicago to seek out the latest and greatest automation and robotic technologies during Automate 2024 in May. As always, A3 did not disappoint with a comprehensive conference paired with new automation technologies on the exhibition floor.
Intralogistics solutions provider Kardex appeared at Automate 2024, North America’s largest robotics and automation event in Chicago (May 6-9), demonstrating the fastest order fulfillment solution per square foot on the market. Kardex FulfillX is a warehouse execution system (WES) purpose-built to allow new AutoStore systems to ramp up faster and is capable of meeting or exceeding business cases in as little as six months. It has been specifically created by experts at Kardex, a global AutoStore partner, to maximize the capabilities of AutoStore robotic cube storage systems for manufacturing customers.
ABB has announced the launch of its 2024 Robotics AI Startup Challenge, a global competition designed to accelerate the development of artificial intelligence (AI) solutions in robotics. The challenge is part of ABB’s ecosystem for innovation, with a previous challenge resulting in the acquisition of Sevensense in January 2024, a Swiss-based start-up and leading provider of AI-enabled 3D vision navigation technology for autonomous mobile robots (AMRs). ABB Robotics' latest challenge will foster innovation and collaboration between ABB and pioneering startups and scaleups worldwide.
Universal Robots, the Danish collaborative robot (cobot) company, and MiR, the Danish manufacturer of AMRs (autonomous mobile robots), recently celebrated the grand opening of their new 215,000 sq. ft. headquarters in Odense, Denmark. Partners from UR and MiR's global ecosystems attended the event, including NVIDIA and Siemens, with whom Teradyne Robotics and its companies have recently announced several collaborations.
Festo introduces its newest generation of Cartesian-handling-system mechanical axes. The ELGD-TB, tooth belt actuators, and ELGD-BS, ball screw actuators, are based on an innovative Festo design.
ABB Robotics will celebrate 50 years of robotic innovation with its latest AI-powered robotic solutions that help companies improve production efficiency and quickly adapt to changing market demands at Automate 2024, May 6-9 at McCormick Place in Chicago (Main Booth #2239; Education Pavilion Booth #5672).
Fortifi Food Processing Solutions ("Fortifi") has appointed Victor Nieto as executive vice president of lean transformation and growth effective May 1, 2024. Fortifi's unified platform of leading global brands and products transforms food processing and automation solutions.
Automate, North America’s biggest robotics and automation trade show, will open its doors on May 6-9 at McCormick Place in Chicago. Stäubli Robotics will present exhibits, live demonstrations, and experiences at Booth 2250, featuring flexible robots adapted to improve safety as well as productivity in a variety of manufacturing environments, from heavy industry to highly aseptic, and meet user needs across sectors.
Registration has officially opened for Pack Expo International, scheduled for Nov. 3–6 at McCormick Place in Chicago. The event is the largest and most comprehensive packaging and processing show worldwide for 2024. According to show producer PMMI, The Association for Packaging and Processing Technologies, the industry's growth underscores the need for manufacturers to access innovative solutions tailored to their diverse needs. From sustainability initiatives to automation advancements and AI integration, businesses now more than ever seek a central hub to discover solutions, stay abreast of the latest topics and trends, and build impactful connections.
LexxPluss is investing heavily in the US to provide its autonomous mobile robots (AMR) technology. The Japanese automation solutions provider has recently announced a new US demo space to showcase the capabilities of its flexible robotic fleet solutions and the flagship 30x30 ft facility is located in the Indiana IoT Lab, in Fishers, Indiana.
PMMI, The Association for Packaging and Processing Technologies, will bring Pack Expo East (March 18–20, Pennsylvania Convention Center, Philadelphia) back to the city of brotherly love for its sixth iteration — and largest show to date. The event represents the most comprehensive showcase of packaging and processing technologies on the East Coast.
Following the motto "LogiMAT 2024 – experience the flow," Siemens is showcasing its extensive automation and digitalization portfolio for the intralogistics industry at this year's Logimat. Intralogistics is the backbone of every supply chain. Increasing demands for energy efficiency and sustainability as well as labor shortages and cybersecurity threats require efficient and adaptive material flow technology.
Fanuc America will showcase its automation solutions designed to help companies’ future proof their supply chain at Modex 2024 in Atlanta, March 11-14, Booth #B-4026.
In December 2023, ABB Electrification Norway AS signed a contract with LIS, Movu Robotics distributor in Norway, to install Movu's escala order fulfillment solution in its production premises in Skien, Norway.
A series of compact, low-cost electromagnets has been released by Magnetic Sensor Systems (MSS). The E-22-150 Series of Tubular Electromagnets (1.5 in. in diameter x 2.15 in.) feature 19 different windings to select from based on the duty cycle and holding force requirements of the application. E-22-150 Electromagnets are immediately available off-the-shelf in sample quantities and OEM quantities for Just-In-Time deliveries.
With the SL 38 product family, Dunkermotoren, an AMETEK brand, has launched a high-performance linear motor series. As an all-stainless-steel version, the ServoLine 38 STL is built with the highest material quality and environmental resistance.
A growing number of companies are adopting robotic solutions in their logistics processes. They provide far greater flexibility than conventional automated handling systems, and can seriously boost productivity, throughput and operational accuracy, even in ‘steady state’ operations. Pallet and bin shuttle systems for automated storage and retrieval are a prime example. With modular design, acting as a set of building blocks to minimize complexity and cost of upgrading, these systems are highly scalable installations can start small and then expand or, if needed, they can downsize just as easily.
Mark Ruberg, packaging industry manager at Beckhoff USA, will serve another four-year term on the PMMI Industry Relations Committee. As an experienced packaging industry expert, Ruberg has been active throughout his career with various committees and work groups at PMMI – The Association for Packaging and Processing Technologies.
VCI bags allow auto parts manufacturers and suppliers to eliminate greasy rust preventatives and opt for the dry protection of VCI film instead. Unfortunately, some VCI bags are doomed to failure, leading to the very corrosion that the VCI bag user was trying to prevent. To avoid these negative consequences, Cortec shares the best path to making sure your next VCI bag is the corrosion solution and not the problem.
This article examines the sound engineering practices and design principles needed to ensure the performance of mechanical linear motion components in sanitary washdowns or chemically cleaned environments. Relevant regulations and agencies, washdown-compatible materials, and best mounting practices and motion components for washdown applications are also discussed.
KUKA Robotics will spotlight a pair of innovative mobile robots March 11-14 in Booth B4003 at Modex 2024 in Atlanta. The KUKA KMP 1500P autonomous mobile platform and the KUKA KMP 600-S diffDrive mobile platform automated guided vehicle (AGV).
Movu Robotics, a supplier for designing, developing, and implementing innovative and easier warehouse automation solutions, announces the launch of the Movu eligo robot picking arm.
Regal Rexnord Corporation will feature an Automated Guided Vehicle (AGV) concept controlled by Kollmorgen that is equipped with ModSort technology at Pittsburgh Robotics Discovery Day, Booth 224. The show will take place at the David L. Lawrence Convention Center on November 16, 2023.
ATI Industrial Automation has introduced the MC-50 Manual Tool Changer, which provides unmatched performance, reliability and quality for the manual exchange of robotic tooling.
Designed and developed with original equipment manufacturers (OEMs) and end users in mind, the Perkins 4-cylinder offering had to be compact, powerful and quiet. Engineered to integrate perfectly into more than 80 different machine models, the 2.8- and 3.6-liter engines continue to deliver the performance, value and reliability customers expect to help them access new opportunities and support their business growth.
Digital transformation is one of the most effective approaches to help today’s CPG companies solve productivity and sustainability challenges. There are new and emerging automation technologies that CPGs can integrate within production lines to reduce energy consumption, streamline processes, increase machine availability and drive new levels of productivity and sustainability.
Stäubli officially inaugurated the Yinhai R&D and Intelligent Manufacturing Base only a few minutes away from its existing production site in Hangzhou, China. The substantial extension to its Chinese main base marks a milestone on the company’s growth path in the region.
The Dune Express is a 42-mile long, fully electric conveyor system that is expected to transform the Permian Basin and substantially improve the unacceptable safety risk existing on the Permian roadways. Originating from the Kermit, Texas facility and spanning into New Mexico, the Dune Express is intended to eliminate millions of truck miles driven across the Permian resulting in avoided traffic, accidents, injuries, and fatalities within the communities.
Conveying parcel delivery with no system downtime is accomplished with speed and accuracy using Miki Pulley CSZ Clutches. Conveyors continuously operate via servomotor power by way of a V-belt. The system automatically switches on/off as programmed when engaged by the CSZ Clutches.
Trade show and event season is upon us. This issue we feature several upcoming shows that are extremely important in terms of mechanical power transmission components and the technology of motion control.
JW Winco has expanded its product range with two compact and robust angular gearboxes that translate rotational movements by 90 degrees and transmit high torques with or without a gear ratio. They are suitable for applications such as handling systems, packaging machines, and conveyor technology.
The most comprehensive packaging and processing event in North America this year, Pack Expo Las Vegas 2023 (Sept. 11–13; Las Vegas Convention Center), will be the largest in its history. Produced by PMMI, The Association for Packaging and Processing Technologies, Pack Expo Las Vegas will feature more than 2,000 exhibitors showcasing the newest innovations for more than 40 vertical markets, spanning nearly 1 million square feet of exhibit space.
Nord Drivesystems will be exhibiting at Pack Expo Las Vegas from September 11-13, 2023, in Booth #7863 in the South Upper Hall.
With the introduction of their first IE5+ permanent magnet synchronous motor in 2021, Nord Drivesystems delivered a new standard of energy efficiency, variant reduction, and reduced operating costs. This Size 71 TENV smooth surface design has paved the way for additions to the IE5+ product family including ventilated designs and larger frame sizes to expand performance and versatility even further. These motors are UL/CSA certified and can be utilized across a wide range of industries and applications.
In several working demonstrations, KUKA Robotics will showcase various innovative automation solutions for specific handling applications during Pack Expo 2023 in booth C-3236 Central Hall.
With the VarioFlow plus chain conveyor system, Bosch Rexroth supplies an essential component for flexible and economical transport within a plant. It conveys packed and unpacked goods vertically and horizontally in the smallest possible space. Together, with the spiral transport system from smartPac Srl, manufacturers benefit from a continuous spiral transport system with low commissioning and maintenance costs.
At the SPS Italia event in Parma, Bonfiglioli presented technologies including its mechatronic solutions for industrial automation, packaging and intralogistics, robotics and IoT.
Parvalux has recently teamed with Keller Industrial Products, Inc., headquartered in Rochester, NY USA. The experienced team at Keller has specialized in mechatronic applications for OEMS and advanced manufacturing sites since 1937. As business development professionals who focus on motion control automation applications, components, and accessories, the company provides expert representation in the industry.
The demands that modern intralogistics place on the used drives are high: In many instances, they must be capable of releasing tremendous forces under extremely confined conditions, also work reliably in continuous or stop-and-go operation, and oftentimes they must also perform highly precise positioning tasks. The speed also plays an important role, after all, many thousand orders need to be processed every day in large warehouses. Drive systems from Faulhaber have often demonstrated their performance here during sorting and transporting as well as with storage and retrieval.
Nord Drivesystems is highly familiar with the packaging industry’s specific requirements and has developed specialized solutions for end-of-line packaging applications.
Applied Manufacturing Technologies (AMT), North America’s largest independent automation engineering company supporting manufacturers, robot companies, systems integrators, line builders, and users of robotic automation worldwide, today announced the promotion of chief operating officer (COO) Craig Salvalaggio to the position of company president.
Logimat was the perfect opportunity for Bonfiglioli to share the expertise and know-how capitalized in over 60 years of business with customers and to present its solutions for forklifts, warehousing trucks and automated storage.
Electric drives in conveyor systems, lifting equipment, and forklifts are the motors that drive modern, efficient, and reliable intralogistics. ABM Drives Inc. develops and manufactures platform-based systems for stationary and mobile applications. ABM works closely with customers to build drive solutions, including motors, gearboxes, brakes, and frequency inverters tailored for specific applications.
Kollmorgen has announced the launch of its AKMA servomotor built specifically for durability, cleanability, and versatility. The motor employs a hardened anodized aluminum surface to offer machine designers a cost-effective hygienic option to stainless steel in medium- to heavy-washdown applications.
During Automate 2023 (Detroit), Kuka Robotics will feature a well-rounded range of solutions for meeting the automation mobility, education, safety and other needs of today’s manufacturers in booth 2623. Within two cells for the Fast Moving Consumer Goods (FMCG) industry sector and in a mobile machine tool-tending cell, Kuka will showcase its KMR iiwa, KMP 600-S diffDrive and KMR Cybertech mobile robots. Kuka’s new LBR iisy cobot will be on display with an education package along with Kuka’s new Ready2_educate and Ready2_educate_arc training carts. Also on display will be Airskin technology for safe, fenceless operation of industrial robots when humans are present as well as a large composite 3D printing cell.
Regal Rexnord Corporation will feature its mobile, scalable, approachable and energy-efficient end-of-the-line sortation system, ModSort, at LogiMAT 2023, Booth 1A41 in Hall 1. The show takes place at the Stuttgart Trade Fair Center (Stuttgart, Germany) from April 25-27.
With the unique combination of a sensor system and kinematics working independently in six degrees of freedom, the Smart Flex Effector compensation module gives industrial robots a sense of touch similar to that of a human hand. It thus allows the automation of processes that were previously difficult to manage or could only be performed manually. The innovation was honored at Hannover Messe with the Hermes Award 2023, the most prestigious international industry prize. The Smart Flex Effector increases the range of applications for robots because it sensitively compensates for tolerances in real time. Users can thus automate joining process, complicated assembly movements or difficult handling tasks. The compensation module can also be retrofitted in existing robotic applications.
Doosan Industrial Vehicle (DIV), a global South Korean forklift manufacturer, partners with Kollmorgen to secure their leading position in the material handling industry. The objective is to innovate and build efficient, sustainable, and reliable custom made AGVs that exceeds their customers’ future requirements.
With its flexible multiproduct line for rotary encoders, Sensata has developed a sustainable solution. The heart of the precise sensor assembly system: The Smart Function Kit for pressing processes. The complete mechatronic package with preinstalled software reduces the programming to a minimum. Engineering, commissioning, and quality assurance become quicker, easier, and more cost-effective.
Precision flexible shaft couplings come in two basic forms, both of which are designed to operate without backlash or excessive inertia while compensating for inevitable misalignment offsets between motor/gearbox and load. Torsionally stiff couplings are made with metallic flexible elements and with the intent to eliminate as much twisting deflection as possible so that the rotation of both shafts is kept as well synchronized as can be.
At Interpack in Dusseldorf, the drive specialist Nord Drivesystems will present its wide product portfolio and great expertise in the packaging industry from May 4-10, 2023 – from decentralized frequency inverters to energy-efficient drives to high-performance surface treatments for washdown or spray areas.
In a bin-picking demonstration, Kuka Robotics showed the capability of its KR Cybertech Nano robot for efficiently extracting items from boxes/containers within a Technica cell during the ProMat 2023 manufacturing, distribution and supply chain equipment and systems show at McCormick Place in Chicago. The bin-picking cell as a solution fulfils industrial demand related to removing parts from containers or bins as well as bags, sacks, cartons, boxes and totes and features artificial vision to identify the parts to be removed and robotics for handling.
The HTB electric brake from Ringfeder features a multiple floating disc design that disengages when power is applied to the brake coil and engages when that power is removed. It is a cost-effective solution when you need extremely high torque in a very compact package.
All throughout the booth at ProMat 2023, Sick (Booth #S3831) will present common misconceptions and present the actual truth about different types of technology. In addition to booth demonstrations, Sick experts will be presenting an educational session called, “Busting Myths: The Auto ID Episode.”
A high force Linear DC servomotor from Moticont has been added to their expanding line of voice coil or moving coil motors. The LVCM-095-038-01 Linear Voice Coil Motor is a true servo motor featuring zero cogging, high accuracy, and high repeatability when operated in a closed positioning loop
In an age of online shopping and mass production, distribution centers are on the rise. Naturally, the amount of packaging is also increasing, and a practical solution is needed to close the loop on recycling so much waste. One major tool distribution company in the U.S. Midwest has found its own “circular economy” answer to this problem by using EcoShield Heat Sealable Paper to recycle used boxes into dunnage bags.
As a pioneer in adopting traditional industrial robots, the automotive manufacturing industry has significantly improved its productivity and efficiency. Although traditional industrial robots have presented significant benefits, one of the fundamental challenges is their high downtime costs. Industrial robots are dangerous and need to be physically separated from human operators. The physical separation means that if a robot malfunctions, human operators must shut all the machines at a production line before entering the robot's working space.
Regal Rexnord Corporation will feature its mobile, scalable, approachable and energy-efficient end-of-the-line sortation system, ModSort, at LogiMat 2023, Booth 1A41 in Hall 1. The show takes place at the Stuttgart Trade Fair Center (Stuttgart, Germany) from April 25-27.
Small component, significant impact: The Smart Flex Effector, a new, sensor-based compensation module from Bosch Rexroth, gives robots and Cartesian linear systems human-like sensitivity and thus offers new opportunities for factory automation. Processes that are difficult to manage can now be automated, optimized and monitored through simple retrofitting. Thanks to a kinematics system that works independently in six degrees of freedom, the tactile device with sensitive touch precisely records the position of the work piece and passes the information to the robot control unit for active compensation purposes.
Tompkins Robotics announced its 2022 annual revenue increased by 93 percent from the prior year. The company launched key technological advancements, including the tSort3D, the xChange system, and their new tSort Induction Lift, as well as subscription financing models. The company also experienced 23 percent employee growth for the same period.
Regal Rexnord Corporation introduces its new Rexnord Curve System with 1540 Series MatTop Chain for conveyor lines requiring a zero tangent 180 and/ or 90-degree curve. The system offers the tightest inner radius (420 mm) and smallest transfer (15 mm) in the industry, for greatly improved space utilization and package handling.
Magnetic Sensor Systems (MSS) has released their E-05-125 Series of Tubular Low-Profile Electromagnets. This compact series of electromagnets measuring just 1.25 in. in diameter x 0.50 in. features 18 different windings to select from based on the duty cycle and holding force requirements of the application.
AD is reporting record results for 2022 in owner/member sales, member purchases from AD suppliers, AD warehouse sales to AD members, net distributions to members, and operational efficiency.
Jergens announces the appointment of Bryon Shafer as vice president of the ASG division. The move comes amidst other corporate changes taking place that further increase Jergens’ focus on manufacturing in the United States. With the new position, Shafer has global responsibility and oversees more than 50 employees that provide torque control, fastening, and precision assembly tools to nearly 30 countries around the world.
Harmonic Drive announces the release of its HPF series of hollow shaft gear units. Designed for heavy-duty industrial applications, these advanced gear units offer high torque outputs and flexible installation options, making them ideal for use in demanding environments.
ABB, Booth B6427, is showcasing innovative solutions necessary to help poultry suppliers reach their processing goals during the 2023 IPPE Expo in Atlanta, Georgia January 24-26. ABB experts will be available to discuss the safety and reliability customers can expect from ABB products and solutions. ABB delivers sustainability, reliability and safety across the entire food chain - from farm to fork.
Cortec Corporation recently announced its acquisition of Cortec Southeast Asia (CSEA) offices in Singapore. CSEA is now a wholly owned subsidiary of Cortec Corporation. This development promises to improve service and support to customers in Southeast Asia due to a direct connection with Cortec headquarters in Saint Paul, Minnesota.
DENSO, a leading mobility supplier, has increased efficiencies, improved employee morale and ergonomics, and managed a tight labor market by deploying six MiR250 autonomous mobile robots to transport materials in its 800,000 square foot powertrain component production facility in Athens, Tennessee.
NORD DRIVESYSTEMS delivers intralogistics solutions that focus on high-efficiency, intelligent automation, and reduced Total Cost of Ownership (TCO). Their innovative drive solutions are extremely versatile and used throughout the world in a wide variety of applications including storage and retrieval systems, transfer carts, and conveyor systems. NORD’s modular product portfolio consists of reliable, UNICASE gear units with long service life, powerful high-efficiency motors, and dynamic variable frequency drives that optimize automation. Easy to service and maintain, NORD drives reduce standstill times and contribute to an increased efficiency and availability of entire systems.
The Timken Company has completed its previously announced acquisition of GGB Bearings.
Many applications in the bulk goods and material handling industry include abrasive environments with large temperature fluctuations and rough operating conditions. To meet these formidable challenges, NORD DRIVESYSTEMS has engineered solutions that are robust, reliable, and easy to service. Their modular product system includes heavy-duty industrial gear units, high-efficiency electric motors with hazard protection features, and variable frequency drives with flexible functionality.
As shippers and logistics handlers continue to struggle with supply chain delays, Mitsubishi Gas Chemical America recently introduced the RP System to the North American market to protect critical components from moisture and oxygen damage that can occur during shipping and long-term storage. Manufactured in Japan, this unique packaging solution is designed to safeguard electronics, automotive parts, and industrial components from rust and oxidation.
CMES Robotics and BHS robotics recently announced that they will be demonstrating mixed case palletizing of various box sizes utilizing an ABB midrange 6-axis robot at Pack Expo International 2022. The event will take place October 23 -26 at McCormick Place in Chicago.
Robert Bunting follows in the footsteps of his grandfather and father with his appointment as Bunting’s president and chief executive officer. On October 1, 2022, Robert succeeded his father, Bob Bunting, in overseeing the continued growth of the global Bunting group. Bob Bunting assumes the position of chairman.
The Power Transmission Distributors Association (PTDA) welcomes two new member companies, Klockner Group and Gerbers of Montana.
The Timken Company has reached an agreement to acquire GGB Bearing Technology (GGB), a division of Enpro, Industries (including exclusive negotiations with respect to the French operations of GGB). Founded in 1899, GGB serves a variety of diverse customers, markets, geographies and applications with a product portfolio that complements existing Timken industry-leading engineered bearing solutions. GGB revenue is expected to be around $200 million in fiscal year 2022.
NFPA’s 2022 Industry and Economic Outlook Conference saw strong attendance and expert insights from top economists. Members and non-members had the opportunity to hear about the latest economic trends and the future of their industry while networking at the Westin Chicago Northwest.
Vanderlande has selected Kollmorgen NDC Solutions as a technology and service partner for their automated guided vehicle (AGV) applications. Based on Toyota Material Handling forklifts equipped with the Kollmorgen NDC Solutions technology, Vanderlande aims to strengthen and grow their portfolio of complete logistic and warehouse solutions
Force Control Industries presents a maintenance-free, no-adjustment crane brake that virtually eliminates crane downtime as well as the need to perform maintenance and adjustment at height. The MagnaShear motor brake employs oil shear technology, providing longer service life in demanding applications like the frequent start/stop cycles seen on cranes, hoists, and winches.
The California Air Resources Board (CARB) recently opened the second round of its Clean Off-Road Equipment Voucher Incentive Project (CORE), providing point-of-sale discounts on off-road zero-emission equipment. The project is administered by CALSTART and has $125M in funding available, more than double the amount allocated to the project when it first launched in January 2020. Originally only for freight, in 2022, CORE is expanding to include funding for the commercial harbor craft and agriculture and construction sectors.
After receiving all the official approvals, Voith successfully completed the acquisition of the majority shares of Argo-Hytos Group on August 2, 2022. Argo-Hytos, based in Switzerland, develops and produces components for hydraulics and system solutions with a focus on the off-highway sector (agricultural tractors, construction equipment and material handling vehicles).
Motion Industries, Inc. is pleased to announce that Lisa Solomon has been promoted to senior vice president – corporate accounts.
Engineers often face challenges when incorporating servo motors into a new machine design, such as choosing between a conventional housed motor or a frameless design. Kollmorgen engineers examine the components of a frameless motor and review three key design considerations that would indicate a frameless solution is the best fit for a machine.
KUKA Robotics will spotlight mobile robotics during the Semicon West show, July 12-14, a solution developed in partnership with the world's largest semiconductor fabricators that reliably transfers materials in areas unsuitable for traditional automated material handling systems.
Increasing demands for energy efficiency and plant transparency are presenting industry with continuous new challenges. Automation specialist Lenze is offering an intelligent, cost- and energy-efficient solution with its decentralized frequency inverters i-series motec. The main beneficiaries will be machine builders and operators from material handling and logistics, automotive, and consumer goods industries.
The latest trends and emerging technologies in areas like robotics, automation, mechatronics and motion control will be on-hand at Automate 2022 in Detroit. The following is a preview of some of the products that will be available on the show floor in June:
The new decentralized inverter series DGM Modular from Bonfiglioli is dedicated for asynchronous and synchronous reluctance motor control. Thanks to its various features and options our high-level performance solution is perfect for packaging, logistics, material handling, food and beverage and pumps sectors. All sizes of the DGM are characterized by high performance and safety features.
SRSI (Slate River Systems, Inc.) and Dematic signed an integrator relationship agreement. SRSI will now be a certified integrator of all Dematic equipment. SRSI is known for its strong customer relationships and quality of work, and with the experience of industry experts at Dematic, looks to further grow its offerings.
Seegrid Corporation has received Frost & Sullivan’s prestigious Technology Innovation Leader Award for 2022. The global research and consulting firm recognized Seegrid for leading the North American AMR market for material handling with complete, connected automation solutions that drive operational resiliency for global leaders in logistics, e-commerce, and manufacturing.
Rexroth North America’s MP1000R is a new 1,000 kg payload capacity autonomous mobile robot (AMR) that can automate material handling applications without additional external infrastructure.
Learn about the effect Covid-19 had on the industrial gearbox market and how the industry is predicted to recover.
Contact | Privacy Policy
©2025 Power Transmission Engineering
