ABB launched the Baldor-Reliance Food Safe SP5+ motor, the world’s first IP69 ultra-premium efficient motor, at the International Production & Processing Expo (IPPE) on January 28. This advanced technology sets a new benchmark for energy efficiency, hygiene and durability in food and beverage production environments.
Flexible couplings are one of the most critical components in mechanical drivetrains. Yet they're also one of the most overlooked during maintenance and inspection. In the marine and power generation industries, neglecting coupling health can be costly. Understanding your couplings and their requirements can ensure a smooth inspection and maintenance cycle. And in turn, can lead to longer coupling life and more uptime.
SKF has signed a Memorandum of Understanding (MOU) with Proteus Marine Renewables (PMR) and GE Vernova’s Power Conversion business. The MOU sets out a framework for a potential alliance to supply tidal turbine generation systems (TTGS) to developers of tidal arrays for commercial, multi-megawatt tidal stream projects. An initial focus will be the supply of a minimum 59MW to MeyGen PLC (MeyGen) at its site in Scotland, the largest tidal stream facility in the world.
Siemens Digital Industries Software has announced the 2025 release of Solid Edge software, bringing new capabilities to its product development software. The latest release also introduces Solid Edge X software, delivering a cloud-enabled secure Software as a Service (SaaS) environment, enhanced with new AI-enabled tools to help users work smarter.
ABB Robotics has launched an Energy Efficiency Service providing manufacturers with a package of consultation, analysis and tools to increase the energy efficiency of their robots. The service offers up to 30 percent energy savings1, addressing the high energy costs that hinder the competitiveness of 58 percent of surveyed global manufacturers, according to a recent Energy Efficiency Movement report.
I would like to briefly discuss some thoughts on ball bearing efficiency specifically in terms of applied load and resulting stress. I don’t want to trivialize this subject; there are textbooks written on the subjects of electrohydrodynamic lubrication (EHL), octahedral subsurface shear stress and friction losses due to elastic hysteresis. This is a just a high-level discussion on the importance of individual bearing stress on efficiency.
Regal Rexnord Corporation has added two new models to its portfolio of Boston Gear Gen2 SS700 Series stainless steel worm gearboxes. The new sizes bring the full product lineup to seven. A larger output shaft bore expands the number of applications each model of gearbox can support, providing flexibility and versatility for customers in a range of industries, including food, beverage and pharmaceuticals.
Forty-five percent of the world’s electricity is used to power electric motors in buildings and industrial applications. By 2030, this cost is projected to reach $900 billion annually. Lowering CO₂ emissions and increasing energy efficiency is critical for our planet, but also for ensuring stable and productive industry operations, lowering operating costs and total costs of ownership. To help motor operators better understand the financial and environmental benefits of upgrading current and end-of-life industrial electric motors, ABB has developed its NEMA motors Energy Savings Calculator.
Verification of a drive system should include all main elements of the system, which are gears, bearings, shafts, and depending on the application other parts such as screws, couplings, and connections. Gears are clearly the most complicated parts for verification, but in many cases, a gearbox failure has its origin in a shaft or bearing failure. The subject of this paper is to explain how verification of a drive system based on measured or simulated torque-speed-time data can be handled.
The ABB Baldor-Reliance EC Titanium motor has been recognized with the U.S. Environmental Protection Agency’s 2024 ENERGY STAR Emerging Technology Award. This annual award recognizes products that meet stringent performance criteria in specific categories. By highlighting innovative solutions with the potential to significantly reduce greenhouse gas emissions, the award promotes promising technologies that may not yet fully align with the ENERGY STAR certification requirements or may be relatively more complex to properly install and operate.
Despite unprecedented energy challenges, 68 percent of oil and gas industry leaders express optimism for sector growth in the coming year. This confidence, revealed in a survey by DNV, underscores the sector's resilience as it balances immediate demands with long-term environmental responsibilities.
A Vesconite and Vesconite Hilube wheel and bushing combination has been deployed at a prominent hydroelectric company in New Zealand, expanding a growing set of hydroelectric reference cases for these bearing materials.
Sulzer Flow Equipment has been selected by TechnipFMC to collaborate in developing new subsea CO2 pump solutions for new technologies. Petrobras’ revolutionary high-pressure separation technology, HISEP, enables the separation of CO2-rich natural gas from oil at the seabed. The process has the potential to provide significant gains in energy efficiency and productivity to Floating Production Storage and Offloading (FPSO) vessels while reducing costs and emissions.
Norway is the official partner country of Hannover Messe 2024. Under the headline “pioneering the green industrial transition”, Norway will showcase digital technology and sustainable solutions for manufacturing. There will also be a strong focus on clean energy, including renewables, hydrogen, ammonia and CCS.
Motor operators in all industries are staying ahead of the curve in energy efficiency and environmental stewardship with ABB Baldor-Reliance SP4 motors. ABB’s SP4 technology meets the NEMA Super Premium efficiency level in a standard AC induction motor design operating across the line, independently of a variable speed drive.
ABB and CERN, the European Laboratory for Particle Physics, have identified significant energy-saving potential through a strategic research partnership focused on the cooling and ventilation system at one of the world’s leading laboratories for particle physics institutes, located in Geneva, Switzerland. The study included energy efficiency audits which have helped to identify a savings potential of 17.4 percent across a fleet of 800 motors.
IIjin Electric's collaboration with Siemens began with the company's efforts to effectively integrate electrical design with mechanical design. “This collaboration went beyond simply changing tools. It represented a major advancement in the company's design approach and methodology.
After years of changing new casings and propellers every three months to their process pump, a metal industry operator switched their worn-out pump to one of Sulzer’s EMW slurry pumps at their melt shop. The client considered the change a leap forward in their slurry pumping technology since the maintenance interval grew significantly, pump efficiency improved, and the change reduced power consumption.
In recognition of its environmental leadership and comprehensive disclosure in the area of climate change, Siemens has been included by the CDP on its annual Climate Change A List, the highest possible performance ranking. CDP is a leading organization evaluating corporate action on climate strategies
Kohler Energy recently announced a new hydrogen KDI engine and its first-ever hydrogen fuel cell power system, expanding an ever-growing portfolio of clean energy solutions during the Agritechnica trade show in Hanover, Germany on November 13.
Siemens Digital Industries Software has announced that Plastic Fischer, a social enterprise that works to reduce plastic waste in rivers, so it does not pollute our oceans, has adopted solutions from the Siemens Xcelerator portfolio of industry software to help scale its operations and bring the benefits of digital transformation to its product development and lifecycle management.
Global market intelligence firm Interact Analysis recently made some revisions to its global manufacturing outlook forecast. According to the company’s latest research, the outlook for global manufacturing is bleak, and this looks set to continue throughout 2024 into early 2025. Europe in particular is feeling the pinch, while the Americas region fared well during the first half of 2023. Due to the semiconductor slump, manufacturing output in the Asia Pacific region is declining – the region accounts for almost 90% of semiconductor and components production.
WorldWide Electric announces the end of its exclusive low-voltage electric motor distribution relationship with H.D. Hyundai Electric Co., Ltd.
The electrification movement has the potential to significantly impact the industrial motion industry in several ways, as industries seek to reduce their carbon footprint, increase energy efficiency, and adopt more sustainable practices. The movement could lead to advancements in energy storage solutions for motion systems, ensuring consistent and reliable operation.
Toray Industries, Inc., has signed an agreement with Honda Motor Co., Ltd., to jointly develop a chemical recycling technology for glass-fiber reinforced nylon 6 parts recovered from end-of-life vehicles. The two have begun verifying this technology, which entails depolymerizing with subcritical water (see note) and regenerating the materials as caprolactam, a raw monomer.
This year’s WEFTEC technical exhibition and conference will see Sulzer presenting several innovations in pumping, equipment control, filtration and aeration technology for the water and wastewater sectors. Exhibiting at Booth 3625 in the South Hall of McCormick Place in Chicago, IL., Sulzer’s water experts will be available from October 2-4 to discuss new advancements in energy efficiency, reliability and sustainability.
To date, nearly 400,000 city and intercity buses worldwide have been equipped with DIWA automatic transmissions. Passengers appreciate the comfortable and quiet ride, made possible by the stepless starting and braking functions. For operators, lower fuel consumption and consequently lower emissions – as well as low maintenance costs – are important aspects that have led them to use DIWA technology for many years now.
The Timken Company has acquired Des-Case Corp., a Nashville, Tenn.-based manufacturer of specialty filtration products for industrial lubricants. Founded in 1983, the company serves customers across a variety of industrial end markets. Des-Case's revenue for the calendar year 2023 is expected to be around $40 million.
At this year’s AIMEX, Sulzer will demonstrate its extensive knowledge of mining equipment. Offering a comprehensive range of services, Sulzer’s experts deliver cost-effective, pro-active maintenance support for all rotating equipment.
The Timken Company is providing slewing drives for the second-largest photovoltaic (PV) solar tracking system project in Australia. Solar tracker manufacturer ATEC chose Timken's Cone Drive solution to help it overcome challenging wind conditions in the mountainous region of New South Wales, where the 280 MW Wollar Solar Farm is being constructed.
Siemens Digital Industries Software recently announced that Tianneng Battery Group Co., Ltd. has selected the Siemens Xcelerator portfolio of industry software to help it drive innovation and enable digital manufacturing in new battery production.
When older equipment starts to affect the output from the power plant – operators need to act fast, to avoid production risks escalating. This is especially true for legacy pumps. However, sourcing new units to fit the surrounding infrastructure and application requirements of the plant can be challenging. When a major thermal power plant in Rajasthan, India, faced multiple issues with an aging boiler infeed pump, the energy player overcame supply and technical challenges through their partnership with Sulzer. Sulzer provided a custom solution under its OEM-X line service, that cushioned the impact to production, while offering the assurance of reliable associated support, spanning maintenance and spares for decades to come.
Gates recently published its annual Sustainability Report for 2022. The report highlights our progress on the four pillars of our sustainability strategy: Governance, Technology, Environment, and Stewardship.
Rotork Controls has established a global reputation for robust and reliable valve actuators, operating in some of the world’s most demanding and critical applications. Thorough testing of the motors used in the actuators is one of the keys to this assured performance, with TorqSense transducers from Sensor Technology playing a vital role in the test process.
Fenner Precision Polymers, a Michelin Group Company and world leader in reinforced polymer technology, announced the purchase of 41 acres of property zoned for light industrial development in Lancaster County’s Penn Township. Fenner plans to develop the site, previously owned by Kreider Farms, as a 400,000-square-foot world-class, environmentally responsible manufacturing facility. The project plans to consolidate the majority of Fenner’s manufacturing plant sites in Pennsylvania into one location. The property is located at 426 Hostetter Road, Manheim.
Brazil’s largest producer of ethanol from sugarcane waste is embarking on a major wave of investment. With plans to build 20 second-generation processing facilities over the next seven years, Raízen has picked Sulzer as a key technology supplier.
Pumping systems are responsible for over 20 percent of the world’s electrical energy demand, and in some industrial plant operations, they can account for up to 90 percent of energy usage. Improving the energy efficiency of pumping and mixing systems is crucial in reducing production costs and supporting a more sustainable future. Several options can be available and with energy prices reaching new heights, the return on investment is rapidly reducing.
SEW-Eurodrive is expanding its comprehensive portfolio to include new motors for purely inverter operation. The synchronous motors of the DR2C.. series satisfy the highest standard-based efficiency class IE5 for adjustable-speed electric motors. This makes them yet another sustainable and energy-saving motor variant.
Kohler Engines, a Kohler company that has specialized in engine production since over a century, and Grastim, a JV specializing in high-efficiency technology solutions, have signed an agreement for a new hybrid self-generation plant at the historic Reggio Emilia facility. The project includes a 2 MW trigeneration plant and an 860 kW photovoltaic park integrated with each other, as well as the possibility of also being powered by hydrogen (hydrogen ready).
The SolarButterfly is focused on reaching millions of people, alerting them to the companies and individuals that are integral in transitioning societies away from fossil fuels toward clean energy technologies. Presently on a four-year journey around the world, the SolarButterfly plans to identify, record, and publicize at least a thousand climate protection pioneers and their solutions.
Siemens Digital Industries Software and IBM recently announced they are expanding their long-term partnership by collaborating to develop a combined software solution integrating their respective offerings for systems engineering, service lifecycle management and asset management.
Precision flexible shaft couplings come in two basic forms, both of which are designed to operate without backlash or excessive inertia while compensating for inevitable misalignment offsets between motor/gearbox and load. Torsionally stiff couplings are made with metallic flexible elements and with the intent to eliminate as much twisting deflection as possible so that the rotation of both shafts is kept as well synchronized as can be.
NYCU (National Yang Ming Chia Tung University) Vulpes Racing—founded in 2008—is a Formula Student Team that combines mechanical engineering, industrial design, public relations, video production and marketing expertise.
Welcome back to Part 2 of our inner ring and creep discussion. We left off with our creep calculation resulting in a 10.5 µm minimum inner ring fit to avoid creep. For the sake of making clean dimensions, let’s call it 10 µm on the lower end and the upper end is simply whatever your manufacturer can hold.
ABB is celebrating the “floor pour” of its newest U.S. flagship campus at 18250 W. Lincoln Avenue. The greenfield location in New Berlin will serve as the U.S. headquarters, manufacturing facility and distribution center for the Drives and Motion Services businesses. The new facility is anticipated to open in late 2024 and will accommodate 720 ABB employees. Approximately $100 million is being invested in the project and is expected to create 100 new jobs over the next three years.
PTE will feature a variety of new component technologies online for bearings, motors, couplings, brakes, gear drives, and motion control systems leading up to Hannover Messe 2023 in Germany. Here is a preview of some couplings suppliers to check out if you're planning on attending the event online or in-person in April.
This study presents a simulation method for considering complex wheel bodies in an analytical tooth contact model. The wheel body is considered using reduced FE stiffness. Reduction points are defined over the width and linked with the analytical gear.
For cylindrical wheel bodies, comparative calculations show fewer deviations from the expected results with the new method. This is due to the additional degrees of freedom in the FEM model. In the calculation with cylindrical wheel bodies, bending due to axial force in tooth contact could also be verified in addition to the deformation in tooth contact and the influence of the shaft-bearing system.
I think I spend more time talking about ball bearings today than at any other time in my career. Ball bearings have always had a large place in automotive, but not typically in high demand positions—other than a few niche areas. High demand positions, such as axles and planetaries, were typically reserved for tapers, needles and cylindricals. The landscape is changing quickly.
A high force Linear DC servomotor from Moticont has been added to their expanding line of voice coil or moving coil motors. The LVCM-095-038-01 Linear Voice Coil Motor is a true servo motor featuring zero cogging, high accuracy, and high repeatability when operated in a closed positioning loop
In an age of online shopping and mass production, distribution centers are on the rise. Naturally, the amount of packaging is also increasing, and a practical solution is needed to close the loop on recycling so much waste. One major tool distribution company in the U.S. Midwest has found its own “circular economy” answer to this problem by using EcoShield Heat Sealable Paper to recycle used boxes into dunnage bags.
Regal Rexnord Corporation will feature its mobile, scalable, approachable and energy-efficient end-of-the-line sortation system, ModSort, at LogiMat 2023, Booth 1A41 in Hall 1. The show takes place at the Stuttgart Trade Fair Center (Stuttgart, Germany) from April 25-27.
Nidec Leroy-Somer has signed an agreement with Airbus to develop an electric motor for its hydrogen-powered fuel cell engine prototype, as part of Airbus’ ambition to bring the first zero-emission commercial aircraft to market by 2035. The long-standing expertise and extensive know-how of the French electric motor manufacturer, who already provides proven advanced technologies to many demanding industries, such as Navy, Nuclear, Railway, Automotive and Robotics is now collaborating on Aviation decarbonization.
Freudenberg Sealing Technologies has developed its own “Green Index” to ascertain the greenhouse gas balance of materials.
Today, gearboxes are inevitable in numerous applications requiring high power density including wind turbines, electric vehicles, cranes, robotics, etc. A combination of high-ratio gearboxes with high-speed, low-torque motors is often used to achieve high power density. Planetary gear trains (PGTs) help achieve a high gear ratio in a compact arrangement. Several configurations of planetary gears are widely studied in this article where the gear profiles used in these studies are primarily involute.
PT products such as gears, motors, pumps, fans and bearings will—without a doubt—continue to run through rigorous and harsh environments for the foreseeable future, but software and hardware improvements aim to disrupt unplanned downtime and machine maintenance through a series of new condition monitoring assets.
The Science Based Targets initiative (SBTi) has validated the Schaeffler Group’s targets for reducing greenhouse gas emissions as being in conformity with SBTi criteria and recommendations and hence in line with what the latest climate science considers necessary in order to meet the goals of the Paris Agreement. The global automotive and industrial supplier is committed to cutting its absolute Scope 1 and Scope 2 greenhouse gas emissions by 90 percent by 2030, with 2019 as its base year. The company has also set itself the target of reducing its absolute Scope 3 greenhouse gas emissions from purchased goods and services, fuel- and energy-related activities, and upstream transportation and distribution by 25 percent over the same period.
The Faulhaber Drive Calculator is the perfect tool for developers to find a suitable drive system for a specific application in record time. It is easy to use and functional: the modern, clear user interface was designed with optimal usability in mind, and helpful tool tips provide valuable detailed information.
The H2Eco Award is presented to national and international companies that contribute an outstanding commitment to a green hydrogen economy by technical innovation, economics and entrepreneurship according to the principles of economic efficiency, sustainability and security of supply. The contribution to protecting the climate stands in the foreground. The principle of H2Eco is an ecological and sustainable hydrogen future.
Wind-turbine drivetrains undergo severe transient loading during start-ups, shut-downs, emergency stops, and during grid connections. Load cases that result in torque reversals may be particularly damaging to bearings, as rollers may be skidding during the sudden relocation of the loaded zone. Seals and lubrication systems must work reliably over a wide temperature variation to prevent the ingress of dirt and moisture and perform effectively at all rotational speeds in the gearbox. Many wind-turbine gearboxes have also suffered from fundamental design issues such as ineffective interference fits that result in unintended motion and wear, ineffectiveness of internal lubrication paths and problems with sealing. Improving the resistance of future gearbox designs to all these issues is a key to the future cost of energy generated by wind turbines.
With over 200 years of combined experience, Interact Analysis is the market intelligence authority for global supply chain automation. Our research covers the entire automation value chain – from the technology used to automate factory production, through inventory storage and distribution channels, to the transportation of the finished goods. The world’s leading companies trust us to surface robust insights and opportunities for technology-driven growth.
ZF honors eight of its approximately 30,000 suppliers worldwide for their excellent performance. The technology group is presenting the Supplier Awards as part of its ZF Global Supplier Summit, which this year focuses on the mobility of the future and global challenges. Current topics such as resilient supply chains, the climate crisis and digitalization are addressed.
Danfoss Power Solutions has appointed Ines E. Sira as the new president of its Fluid Conveyance division, effective immediately. Based at the company’s campus in Eden Prairie, Minnesota, Sira will be a key member of the Power Solutions leadership team and will report directly to Eric Alström, president of Danfoss Power Solutions.
Cortec Corporation is proud to be named a BioPreferred Program Champion. Cortec recently received this badge of honor in recognition of its involvement and faith in the USDA BioPreferred Program, which celebrates its 20th anniversary this year.
SKF has developed a new design for axleboxes to help customers reduce weight and improve the performance of bogies while reducing the environmental impact. The new Y25 axlebox, designed for trains weighing up to 25 tons, complies with industry standards.
Sulzer recently attended the Rio Oil & Gas Expo 2022, where visitors discovered its pumps, 24/7 rotating equipment services and chemical separation technologies. Attendees met with Sulzer experts to see how these solutions can maximize process uptime.
Decarbonization is a key focus for leading design, engineering and manufacturing organizations. To provide access to the most up to date CO2e emission data for materials and energies, Siemens Digital Industries Software recently announced its collaboration with sustamize GmbH, a leading ClimateTech company providing professional technology, data and software solutions enabling companies to measure, optimize and manage CO2 emissions.
In its largest order to date, Danish wind turbine test specialist R&D Test Systems will develop the 30 MW powertrain and gearbox test bench for ZF Wind Power’s future “Test & Prototype Center” at Lommel, Belgium. Capable of simulating the multiplicity of wind loads that a nacelle powertrain might experience in its lifetime, the test rig, to be delivered in 2024, will help improve product reliability and shorten time to market.
Stöber Antriebstechnik GmbH + Co. KG rely on the FVA-Workbench for dimensioning and verification of their drives. The calculation and simulation software allows Stöber engineers to develop their innovative gear unit solutions more quickly and efficiently. The result: higher quality products.
What's the latest in software design and simulation in the power transmission market? Here's a recap of some of the latest software solutions for bearings, gears, drivetrains and e-mobility applications.
Sulzer has partnered with CELLiCON to scale up its manufacturing technology for nano structured cellulose – a highly sustainable, plant-based alternative to conventional polymers. The technology slashes the traditionally high costs and footprint associated with nanocellulose, allowing it to be scaled and used as a building block for a wide variety of everyday products, from textiles to glues.
SKF announces the appointment of Annika Ölme as CTO and senior vice president, technology development.
The Timken Company recently announced new appointments for company executives Christopher Coughlin, Andreas Roellgen, and Natasha Pollock.
Growth in the global linear market is being driven by both increased demand across key industries and the clear advantages of linear motors over conventional motors. Within this segment, the contribution of ANCA Motion’s LinX M-Series linear motor has expanded the market and stands out above ball screw and flatbed motor options due to several design intricacies that simplify installation and use and push quality performance even further. Designed for function, the tubular construction of the LinX has several key benefits over flat linear motors.
The California Air Resources Board (CARB) recently opened the second round of its Clean Off-Road Equipment Voucher Incentive Project (CORE), providing point-of-sale discounts on off-road zero-emission equipment. The project is administered by CALSTART and has $125M in funding available, more than double the amount allocated to the project when it first launched in January 2020. Originally only for freight, in 2022, CORE is expanding to include funding for the commercial harbor craft and agriculture and construction sectors.
The engineering community is fascinated with big, shiny, yellow machines. Walk into any manufacturing facility around the globe and you’ll find guests huddled around the biggest, loudest, and most intimidating equipment on the shop floor. These large machines must play by the same rules as everybody else—they need to reduce energy consumption, lower plant costs, and increase productivity. Many power transmission component suppliers are tasked with optimizing this equipment.
Print is not dead. While reading magazines cover-to-cover is a lost art—thanks to work responsibilities, 24-hour sports/entertainment coverage, and the universal time suck known as Instagram—someone, somewhere still prefers the printed word to the shiny, unfriendly artificial light of tablets and smartphones. This publication (hopefully) provides information engineers can discuss, debate, or collaborate on for future manufacturing endeavors. There would be no words, no photographs, no advertising without the paper used to print this very magazine.
SKF has entered into a collaboration that will combine Quaker Houghton’s industrial oils and application expertise with SKF RecondOil’s Double Separation Technology (DST) to enable the industry to more efficiently utilize its resources by reducing the unsustainable linear of use of oil. The circular use of oil will also help reduce the industry’s environmental footprint through a reduction in CO2 emissions, lessen the amount of neat cutting oil purchased, and reduce handling and disposal costs whilst providing significant performance improvements.
Bosch Rexroth will offer a free webinar on July 28, 2022, "How Self-Contained Actuators Simplify Your Engineering." The webinar takes place 9:00 - 9:45 AM EST.
Automate 2022 in Detroit offered the latest and greatest in automation, robotics, and motion control technology. The perception that automation will threaten the livelihood of shop floor personnel is slowly giving way to the idea that these tools and resources will transform shop floors and keep companies up and running.
Gates recently published its 2021 corporate sustainability report highlighting progress toward goals, transparency and Eco-Innovation.
Gates Industrial Corporation continues to invest in and has expanded its Carbon Drive product portfolio. The company is introducing next-generation belts and other components to enable advances in bicycle drivetrain design and meet growing global demand.
Charging power. Infrastructure. Longer battery life. Every time the industry comes together for the CTI Symposium, we get a clearer picture of the technology development toward our electric future.
Siemens Digital has added features and updates for Simcenter SPEED, Simcenter Motorsolve and Simcenter MAGNET 2022.1 to improve accuracy, flexibility and connectivity. This 2022.1 update makes Simcenter SPEED and Simcenter Motorsolve more accurate and better integrated to Simcenter STAR-CCM+.
Fenner Precision Polymers announced the move of its corporate offices. The new location, is in Manheim Township, will be at 187 West Airport Road in Lititz, Pa. Approximately 100 of Fenner’s office staff are expected to move into the new offices beginning fall of 2022. Ongoing construction updates will be underway in the space through October. The company anticipates that the remaining corporate staff will have relocated to the new facility by end of 2022.
NORD DRIVESYSTEMS is bringing their future-ready drive solutions to the American Association of Airport Executives (AAAE) Conference and Exhibition June 5th – 8th in Seattle, Washington. NORD delivers drive solutions for every application in baggage handling systems and their innovative products are utilized throughout airports worldwide.
One of ONYX’s customers and a leader in driving up the reliability and asset performance of the wind industry, Pattern Energy, uses ONYX turbine monitoring for over 1,100 wind turbines. Across this fleet ONYX connects several CMS hardware types to fleetMONITOR, a multi-brand solution for drivetrain monitoring. Two of the wind farms were retrofitted with ecoCMS in 2018, the technology with which ONYX disrupted the CMS industry.
SKF RecondOil’s technology, which removes even the smallest impurities from circulating oil, is now available in a compact form.
The gear and gear drive segment of mechanical power transmission continues to focus on performance, reliability and safety. There are several new products offering increased load capacity, reduced friction and longer service life. For those components unable to keep up with industrial demands, there’s a gearbox MRO team waiting to handle emergency repair services.
Deutsche Post DHL Group (DPDHL) has joined ABB’s Energy Efficiency Movement to reinforce its commitment in reducing its carbon footprint. This is an important step in DPDHL’s initiative to lead the logistics industry towards a greener and more sustainable future, with a commitment to invest €7 billion (or $7.64 billion) by 2030 to reduce its greenhouse gas emissions.
Manufacturing is facing constant challenges stemming from labor shortages and disrupted supply chains to productivity declines and the high replacement and maintenance costs of legacy equipment. Trends today include equipment upgrades, e-commerce, a push for more robotics and automation and faster software and IIoT solutions.
A Conversation with Jeff Hemphill, CTO at Schaeffler Group USA Inc. Matthew Jaster, Senior Editor
Contact | Privacy Policy
©2025 Power Transmission Engineering
