[advertisement]

Associations

FEATURE ARTICLES | 2025-04-08

LIFT Opens Advanced Metallic Production and Processing (AMPP) Center in Detroit

LIFT, the Department of Defense-supported national advanced materials manufacturing innovation institute, has officially opened its state-of-the-art Advanced Metallic Production and Processing (AMPP) Center in Detroit’s historic Corktown district. This facility will play a critical role in strengthening the U.S. industrial base by accelerating the design, development, and deployment of novel metallic materials, filling a key gap in the nation’s defense manufacturing base.

INDUSTRY NEWS | 2024-12-13

Eurotrans Report Productive General Assembly 2024

The recent EUROTRANS General Assembly in Bad Homburg, Germany, on November 29, 2024, was highly productive, bringing together participants from 10 countries. The association extends heartfelt thanks to host Mr. Fabian Maurer, Ringspann GmbH, Bad Homburg, and his team for their hospitality.

INDUSTRY NEWS | 2024-09-16

AD Welcomes New Divisional Board Member

AD is proud to announce that Mark Balcom, president and owner of Pooley Inc., has been elected to its Bearings & Power Transmission Divisional Board, effective August 2024.  

INDUSTRY NEWS | 2024-07-15

PTDA 2024 Industry Summit Takes Place This October

Members of the Power Transmission Distributors Association (PTDA) will gather at The Broadmoor in Colorado Springs, CO., for the 2024 Industry Summit on October 24-26. This year’s program—“Broadening Horizons. Elevating Excellence.”—will do just that, expand participant’s knowledge of leading-edge trends and solutions for tackling industry challenges, along with opportunities to network with peers.

INDUSTRY NEWS | 2024-05-24

AD Industrial & Safety U.S. Division Ratifies Two Divisional Board Members

AD is proud to announce the appointment of two new members joining the Industrial & Safety – U.S. Divisional Board: Alex Hodge, CEO of Horizon Distribution and Matt Onofrio, president of GT Midwest, effective June 2024. The Divisional Board, a vital aspect of AD's member-owned and governed structure, plays a critical role in shaping strategies and helping to direct the future for each respective business segment.

INDUSTRY NEWS | 2024-02-08

AD Sets Sales Record in 2023

AD is reporting a record result for 2023 in owner/member sales, which increased 5 percent over prior year to $78.9 billion.

Purchases by member companies from AD supplier partners were $19.8 billion. Net distributions to owner/members were $1.4 billion.

INDUSTRY NEWS | 2024-01-17

Eurotrans Shapes the Future with Standards

The importance of standardization work is often underestimated or given little attention. For companies, it is often an important basis for innovation and competitiveness. It is therefore important to inspire young talents for standardization. Andre Thuswaldner, vice president of Eurotrans, described this topic vividly:

What are Standards?

Standards are documents that provide rules, guidelines and requirements for the design, production, use or performance of materials, products, processes, services or persons. They are the result of voluntary national, European and international standardization activities. The use of standards is voluntary. Standards only become binding if they are the subject of contracts between parties, for example between vendor and buyer, or if compliance with them is mandatory by law.

[advertisement]
INDUSTRY NEWS | 2023-11-02

PTDA Honors Chris Bursack with Warren Pike Award

The Power Transmission Distributors Association (PTDA) has named Chris Bursack the 32nd recipient of its Warren Pike Award for lifetime achievement in the power transmission/motion control (PT/MC) industry. He received the accolade during the PTDA 2023 Industry Summit on October 20 in Amelia Island, FL.

INDUSTRY NEWS | 2023-06-20

PTDA Industry Summit Offers New Discoveries

The Power Transmission Distributors Association (PTDA) will convene for the PTDA 2023 Industry Summit in Amelia Island, Fla. on October 19-21, 2023. This year’s program—themed “Discover”— will offer cross-channel networking, shared learning and collaborative experiences. 

INDUSTRY NEWS | 2023-06-05

Salim Haffar Discusses EUROTRANS Priorities in 2023 and Beyond

Salim Haffar, deputy general manager at I-MAK, was reelected as president of EUROTRANS in 2022. This is Haffar’s third term in this role. PTE recently caught up with Haffar to discuss the evolution of EUROTRANS, the focus of the International Drive Conference at Hannover Messe and the current state of I-MAK’s gearbox business in Turkey.

INDUSTRY NEWS | 2023-06-05

ANSI Seeks Comments on Proposal for New ISO Technical Committee

As the U.S. member body to the International Organization for Standardization (ISO), the American National Standards Institute (ANSI) seeks comments by June 30 on a draft proposal for a new ISO technical committee on mechanical energy storage technology.

INDUSTRY NEWS | 2023-05-04

AD Bearings & Power Transmission Hosts North American Meeting

AD Bearings & Power Transmission hosted its 2023 North American Meeting from March 21 to 24 in San Diego, where divisional members and suppliers connected for best practice sharing and meeting sessions dedicated to growing their business.

INDUSTRY NEWS | 2023-03-31

AD Announces 2023 Board of Directors

AD announced that its owner/members elected three directors to its board of directors.
Each year, the AD board’s Nominating & Governance Committee holds an open nomination and voting period, during which AD members select members to its board of directors. Currently, more than 140 of AD’s 850-plus member companies provide leadership on corporate and divisional boards and committees.

INDUSTRY NEWS | 2023-03-24

AGMA Announces New Board of Directors and Officers at Annual Meeting

The American Gear Manufacturers Association (AGMA) has changed its board of directors. These changes took place at the 2023 AGMA Annual Meeting in Lake Buena Vista, Fla.

[advertisement]
INDUSTRY NEWS | 2023-03-22

Optibelt Honored for Long-Standing EPTDA Membership

Optibelt GmbH has been honored by the European Power Transmission Distributors Association (EPTDA) for its long-standing membership.

INDUSTRY NEWS | 2023-02-03

AD Reports Record 2022 Results

AD is reporting record results for 2022 in owner/member sales, member purchases from AD suppliers, AD warehouse sales to AD members, net distributions to members, and operational efficiency. 

INDUSTRY NEWS | 2023-01-23

PTDA Welcomes Nelson Electric Motors

The Power Transmission Distributors Association (PTDA), the leading association for the industrial power transmission/motion control (PT/MC) distribution channel, welcomes a new distributor member: Nelson Electric Motors (Opelika, Ala.)

INDUSTRY NEWS | 2022-11-28

Salim Reelected EUROTRANS President

EUROTRANS recently announced the reelection of Haffar Salim as president of their organization during the International Drive Conference that took place online November 17, 2022. 

INDUSTRY NEWS | 2022-10-11

PTDA Welcomes Klockner Group and Gerbers of Montana

The Power Transmission Distributors Association (PTDA) welcomes two new member companies, Klockner Group and Gerbers of Montana.

INDUSTRY NEWS | 2022-10-10

Members, suppliers, and new leadership come together at AD Bearings & Power Transmission Network Meeting

AD Bearings & Power Transmission welcomed over 140 member and supplier partner attendees to its annual Network Meeting from August 23-25 in Frisco, Texas. The meeting brought the division’s members and suppliers together to discuss industry trends, celebrate a year of growth and collaboration, and learn about important divisional updates.

INDUSTRY NEWS | 2022-09-28

BSA Announces Excellence Awards

On September 19th, Todd Hamlin, BSA president, and senior vice president of DXP Enterprises, announced the Annual BSA Excellence Awards for outstanding service by bearing distributors and bearing manufacturers to end-users.

REVOLUTIONS | 2022-08-11

CTI Symposium Berlin Reflects Push Toward E-Mobility

CTI Symposium Berlin starts with two introductory days dealing with the basics and practice of automotive transmissions, hybrid and electric drives for newcomers and those who want to refresh their knowledge. This is followed by the main program with keynote speeches, panel discussions and technical presentations.

INDUSTRY NEWS | 2022-08-09

PTDA Welcomes MEM Industrial, LLC

The Power Transmission Distributors Association (PTDA), the leading association for the industrial power transmission/motion control (PT/MC) distribution channel, welcomes a new member company, MEM Industrial. 

INDUSTRY NEWS | 2022-08-05

AD Announces VP of AD Network Community

AD is pleased to announce it has hired Kristen Abbas as vice president, AD Network Community, effective August 1, 2022. As VP, AD Network Community, Abbas will be responsible for managing, implementing, innovating, and expanding AD’s meeting and network ecosystem including additional opportunities for peer-to-peer engagement opportunities for AD members. Abbas will report to Marty McLaughlin, chief marketing officer.

INDUSTRY NEWS | 2022-05-06

Gates Wins Motion's 2021 Supplier of the Year Award

Motion Industries, Inc., has named Gates Corporation “2021 Supplier of the Year.” The award recognizes companies that have shown exceptional commitment to Motion through quality products and services, as well as earning the highest score in the multi-faceted Supplier Stratification rating system. The presentation took place May 3rd at Motion’s headquarters in Birmingham.

INDUSTRY NEWS | 2022-05-04

Schaeffler Receives BSA Innovation Award

Global industrial and automotive supplier Schaeffler was honored by the Bearing Specialists Association (BSA) with the 2021 “Bearing Manufacturer Excellence of Innovation in Product Design Award” for its breakthrough OPTIME condition monitoring device.

INDUSTRY NEWS | 2022-04-29

PT WORK Force Expands 2022 Resources

The PTDA Foundation, through its PT WORK Force initiative, provides programs and resources to help power transmission/motion control (PT/MC) employers address ever-escalating issues surrounding recruitment and retention.

INDUSTRY NEWS | 2022-04-25

AD Earns Top Workplace Award for 4th Consecutive Year

For the fourth consecutive year, AD has been recognized as a Top Workplace in the Delaware Valley. The anonymous employee engagement survey, administered by technology partner Energage, LLC, measures 15 drivers of engaged cultures that are critical to the success of an organization, including alignment, execution and connection. The awards program, in partnership with The Philadelphia Inquirer, recognizes organizations that outperform in a crowded market, lead a people-first culture, and excel at attracting top-tier job seekers and new business.

EVENTS | 2022-02-01

Calendar

Upcoming events in March and April
TECHNICAL ARTICLES | 2022-02-01

Machine Elements - Shaping the Future through Continuous Evolution

Does Moore's Law apply to machine elements such as gears, bearings and mechanical components?
REVOLUTIONS | 2022-01-31

Gearmotors: The Art of Precision and Reliability

High performance, high precision and component compatibility top the list of gearmotor trends in our product-roundup for 2022. These products can b...
EVENTS | 2021-12-01

Calendar

Calendar of early 2022 events
INDUSTRY NEWS | 2021-12-01

Industry News

The complete Industry News section from the December 2021 issue of Power Transmission Engineering.
PUBLISHER'S PAGE | 2021-10-01

Coming Together

The American Gear Manufacturers Association recently held our biennial trade show, the Motion+Power Technology Expo. Although it was a smaller, quieter show than normal, it was well worthwhile for those who were able to make it.
INDUSTRY NEWS | 2021-10-01

Industry News

The complete Industry News section from the October 2021 issue of Power Transmission Engineering
TECHNICAL ARTICLES | 2021-10-01

In the Fast Lane with the FVA-Workbench: Formula Student Team KA-RaceIng

Cutting-Edge gearbox design software.

INDUSTRY NEWS | 2021-09-01

Industry News

The complete Industry News section from the September 2021 issue of Power Transmission Engineering
INDUSTRY NEWS | 2021-08-01

Industry News

The complete Industry News section from the July 2021 issue of Power Transmission Engineering
TECHNICAL ARTICLES | 2021-08-01

The Influence of Rolling Bearing Profiling on Rigidity and Rating Life

An explanation of the detailed calculation of rolling bearings in the FVA-Workbench based on consideration of the profiling of roller bearings.
PUBLISHER'S PAGE | 2021-06-01

Getting Ready for Normal

In May, Gov. Mike Parson of Missouri sat down and recorded a video on behalf of AGMA's upcoming Motion+Power Technology Expo
INDUSTRY NEWS | 2021-06-01

Industry News

The complete Industry News section from the June 2021 issue of Power Transmission Engineering
FEATURE ARTICLES | 2021-06-01

The Power Shift

Companies look to fuel economy, energy efficiency and operating costs to improve off-highway applications.
TECHNICAL ARTICLES | 2021-06-01

Joint Research and Simulation Software for an Optimized Rolling Bearing Friction Model

FVA Software bundles the results and knowledge from hundreds of research projects in one platform.
INDUSTRY NEWS | 2021-03-01

Industry News

The complete Industry News section from the March 2021 issue of Power Transmission Engineering.
| 2020-12-01

Bosch Rexroth Celebrates 30 Years of Linear Motion Innovations

Bosch Rexroth began developing linear bushings, shafts, slides, and transfer tables as prototypes in the 1960s. The first two complete linear modul...
INDUSTRY NEWS | 2020-12-01

Industry News

The complete Industry News section from the December 2020 issue of Power Transmission Engineering.
| 2020-11-18

A Changed World - Challenges and Opportunities

2020 started out like a normal year with some chatter about a virus outbreak in China but then events quickly spread and the world, as we knew it, ...
| 2020-10-15

2020 and Beyond with Bonfiglioli

Company offers new geared motor platform while navigating unusual business environment

What’s a product launch look like during a pandemi...
PRODUCT NEWS | 2020-09-01

Product News

The complete Product News section from the September 2020 issue of Power Transmission Engineering.
INDUSTRY NEWS | 2020-09-01

Industry News

The complete Industry News section from the September 2020 issue of Power Transmission Engineering.
| 2020-08-03

Freudenberg Sealing Develops Thermally Conductive Elastomer for Electric Cars


Wherever a lot of computing is performed or high currents flow, large amounts of waste heat are generated. Freudenberg Sealing Technologi...
PRODUCT NEWS | 2020-08-01

Product News

The latest product news from Miki Pulley, Voith, Firgelli Automations, Heidenhain, Zero-Max, Gates, KEB America, Siemens, H2W Technologies and Emerson Automation
GEAR TALK WITH CHUCK | 2020-07-24

Help Wanted

Northwest Pennsylvania’s Oil Region has a long history in manufacturing. Many of the widgets that made oil extraction and processing possible were ...
| 2020-06-08

Shrink Your Start-to-Finish Time

Boosting Productivity in Gearbox Design with Siemens Digital

An increasing awareness of environmental concerns has given rise in the auto...
TECHNICAL ARTICLES | 2020-04-01

Limitations of the Timoshenko Beam Theory

FVA Offers FE Shaft Calculations in the FVA-Workbench
PUBLISHER'S PAGE | 2019-12-01

Embracing Change

Change can be daunting, nerve-wracking or even downright scary. But when we're faced with change in our lives, it's not the change itself we fear. It's the unknown elements that come with it. "You don't know what you don't know," a wise man once told me.
INDUSTRY NEWS | 2019-12-01

Industry News

The complete Industry News section from the December 2019 issue of Power Transmission Engineering.
| 2019-09-12

What Does the Future Hold for the Automotive Industry?

We all want to know the answer to this question as it tells us as a business where to invest our R&D development, steers us to consider what ke...
FEATURE ARTICLES | 2019-09-01

MPT Expo Map and Listings

Find the exhibitors you want to visit at the first-ever Motion+Power Technology Expo (formerly Gear Expo).
FEATURE ARTICLES | 2019-09-01

MPT Expo 2019 Booth Previews

MPT Expo takes place October 15-17 at TCF Center (formerly the Cobo Center) in Detroit. Here are booth previews of some of the exhibitors most relevant to the gear industry.
PUBLISHER'S PAGE | 2019-08-01

Invitation

I'd like to invite you to come visit us at Motion+Power Technology Expo. The show takes place in October at Cobo Center in Detroit, and we'll be there in booth #3826.
EVENTS | 2019-06-01

The Electric Evolution

CTI Symposium Presents Latest Automotive Transmission Developments and Applications.
PUBLISHER'S PAGE | 2019-06-01

Get Ready, Get Set...Show

If you are involved in the acquisition of technology (whether your direct role is machine design, maintenance, purchasing or management), trade shows still provide one of the best ways to evaluate options, learn about the latest technology and find solutions to problems.
TECHNICAL ARTICLES | 2019-06-01

Documentation of Gearbox Reliability - An Upcoming Demand

The proof of the reliability of a gear drive is now an additional requirement. In Europe, the acceptance authorities for wind turbines are requesting a system reliability proof from gearbox manufacturers. The AGMA committee reviewing the AGMA 6006 standard for wind turbines is considering adding a chapter about design for reliability. However, reliability considerations are not new; NASA, for example, was in the 1980s using reliability concepts for gear drives.
INDUSTRY NEWS | 2019-06-01

Industry News

The complete Industry News section from the June 2019 issue of Power Transmission Engineering.
INDUSTRY NEWS | 2019-04-01

Industry News

The complete Industry News section from the April 2019 issue of Power Transmission Engineering.
PRODUCT NEWS | 2019-03-01

Product News

The complete Product News section from the March 2019 issue of Power Transmission Engineering.
POWER PLAY | 2019-03-01

Industry News

The complete Industry News section from the March 2019 issue of Power Transmission Engineering.
| 2019-02-04

Construction Time Again

Bauma 2019 Examines Sustainability, Digitization and Energy Efficiency

Bauma 2019 (April 8-14, Munich, Germany) is a complete overview of...
FEATURE ARTICLES | 2019-02-01

Gears, Fluid Power and Electric

The American Gear Manufacturers Association has evolved its trade show. What was formerly Gear Expo is now the Motion + Power Technology Expo (MPT Expo), an event intended to represent the entire motion and power transmission supply chain. As part of the expansion of the show’s scope, AGMA has partnered with the NFPA (National Fluid Power Association) to include a fluid power pavilion and additional educational sessions.
| 2019-01-28

Servo Needs a Solid Footing

Donald P. Labriola II, president and founder of QuickSilver Controls, Inc. For a servo system, it is important to remember that the servo respon...
| 2019-01-23

Improperly Testing Belt Tension Can Easily Damage Small Motors

Donald P. Labriola II, president and founder of QuickSilver Controls, Inc. Most of us want to just instinctively squeeze a belt between a pair o...
FEATURE ARTICLES | 2018-10-01

Hannover Messe USA - What we Learned

IMTS 2018 had its fair share of machine tools, 3D printers and advanced robotics. Meanwhile, the East Hall — home to Hannover Messe USA — took a more systematic approach, highlighting the smart components and techniques that will be integral in developing the digital factory of the future.
INDUSTRY NEWS | 2018-10-01

Industry News

The complete Industry News section from the October 2018 issue of Power Transmission Engineering.
| 2018-09-25

Future of E-Mobility

Schaeffler Touts System Solutions and Electrification at Detroit Symposium

[caption id="attachment_852" align="alignnone" width="300"]
| 2018-09-17

Hannover Messe USA: What We Learned

The East Hall—home to Hannover Messe USA— took a systematic approach to manufacturing, highlighting the smart components and techniques that will b...
FEATURE ARTICLES | 2018-09-01

Engineering Showcase - Gears and Gear Drives

Machinists Inc. is integrating the machinery, equipment and know-how of The Gear Works-Seattle Inc.
INDUSTRY NEWS | 2018-09-01

Industry News

The complete Industry News section from the September 2018 issue of Power Transmission Engineering.
| 2018-08-08

Thermal Growth Issues and Solutions for Shaft Couplings

Nick Agius, National Rotating Equipment/ACHE Product Specialist, Motion Canada I have been researching “Thermal Growth” issues for deca...
| 2018-05-22

Automotive: On the Road to Disruptive Technology

The future of the automotive industry looks complicated. Urbanization, energy regulations, the electrification of vehicles, autonomous driving and ...
| 2018-04-12

Five Initiatives to Develop and Keep Workforce Talent

Written by Peter Feil, vice president, general manager at Stober Drives, Inc. The bright lights of the big city can make finding skilled workers...
| 2018-04-02

Performance Demands of Motion Control Applications

The following looks at the latest motion control products and technologies from Rockwell Automation, Power Jack Motion, B&R Automation and Beck...
EVENTS | 2018-04-01

Momentum in Wind Power

Coming off of a stellar 2017 for the wind power industry, Wind Power 2018 is all about carrying that momentum forward.
POWER PLAY | 2018-04-01

It's a Jungle Out There

Harsh environments and saltwater properties tend to make it difficult for motors, gearboxes and engines to perform consistently at a high level.
| 2018-03-13

Vesconite Supports Airboats for African Ecotourism

A company that specializes in African airboat ecotourism tours has switched to the hard-wearing thermoplastic Vesconite discs and holders as a supp...
PRODUCT NEWS | 2018-03-01

Product News

The complete Product News section from the March 2018 issue of Power Transmission Engineering.
| 2018-02-20

Smarter Mechatronics

Mechatronics and the Internet of Things go hand in hand, so it’s no surprise that leading mechatronics companies are coming out with IIoT produ...
FEATURE ARTICLES | 2018-02-01

Emerging Motor Technologies

Copper's continuing role in energy-efficient motor development.
FEATURE ARTICLES | 2018-02-01

Industry News

The latest new hires and corporate announcements from around the industry.
INDUSTRY NEWS | 2017-12-01

Industry News

The complete Industry News section from the December 2017 issue of Power Transmission Engineering.
| 2017-11-28

A Look at Belt, Chain and Gear Drive Technology

By Jack Warner The need for producing more energy increases with our rising need for commercial, industrial, and residential space. In North Ame...
| 2017-10-06

Coating Factory Utilizes Self-Lubricating Bearings

Contributed by: VescoPlastics Dam linings, billboards, butchery aprons, upholstery materials, place mats, tents, tarpaulins, and jumping castle ...
FEATURE ARTICLES | 2017-10-01

Familiar Goals, New Solutions

Gearmotor manufacturers find new ways to push the envelope. (With Sidebar on new alternative to planetary gearboxes)
FEATURE ARTICLES | 2017-10-01

U.S. Wind Power Blowing Hot as New Installations Flourish

A look at recent installations, plus interviews with some wind industry insiders.
FEATURE ARTICLES | 2017-09-01

Gear Expo 2017 Showstoppers

This special advertising section highlights exhibitors from Gear Expo 2017 and ASM Heat Treat 2017.
INDUSTRY NEWS | 2017-09-01

Industry News

The complete Industry News section from the September 2017 issue of Power Transmission Engineering.
PUBLISHER'S PAGE | 2017-08-01

Harvesting Knowledge

The season of harvest is upon us. And I don't mean crops, although here in the U.S. Midwest, there's plenty of that going on, too. No, what I mean is knowledge, because in addition to being the end of the growing season, the transition between summer and fall also marks the busiest time of year when it comes to trade shows, conferences and industry gatherings.
| 2017-07-13

Full Cinematic Immersion

“For your safety, please keep your hands, arms and legs inside the vehicle at all times.” We’ve heard this statement countless times at amusemen...
| 2017-07-10

Nordex Teams with University of Hartford on Prosthetics for Kids Project

Charles Paulsen, associate director of the Mechanical and Manufacturing Technologies for Energy and Sustainability (MET2) program at the Connecticu...
VOICES | 2017-06-01

Gear Expo - The Drive Technology Show

Where do you go to find new suppliers for your power transmission projects? Where do you test drive the latest technologies available?
| 2017-05-08

There Must Be 50 Ways to Reduce a Duty Cycle

Man, oh man — 2017 is going to be one for the record books! My wife and I recently had the 3rd and FINAL installment of the Parker clan. A healthy ...
INDUSTRY NEWS | 2017-04-01

Industry News

Corporate and personnel announcements from the April 2017 issue of Power Transmission Engineering.
EVENTS | 2017-04-01

Doubling Down and Forging Ahead

After getting positive feedback on changes made to the show last year, AWEA Wind Power is doubling down and taking their ongoing transformation even further.
ASK THE EXPERT | 2017-03-01

ISO-AGMA Standards: Specific Sliding Defined

Does the definition of specific sliding mean the same between ISO 21771:2007 and AGMA 917-B97? In ISO, specific sliding is the ratio of the sliding speed to the speed of a transverse profile in the direction of the tangent to the profile. In AGMA, specific sliding is ratio of gear tooth sliding velocity to its rolling velocity.
TECHNICAL ARTICLES | 2017-03-01

Copper in Motor Repair Facilities

Three electric motor repair facilities share best practices for utilizing copper in motor repair, and recommending new motors to replace older, less-efficient motors
INDUSTRY NEWS | 2017-03-01

Industry News

The complete Industry News section from the March 2017 issue of Power Transmission Engineering.
FEATURE ARTICLES | 2017-02-01

Hands-On Hydraulics and Pneumatics

Action Challenge Introduces Students to Fluid Power Industry in the latest STEM educational effort from the National Fluid Power Association.
INDUSTRY NEWS | 2017-02-01

Industry News

The complete Industry News section from the February 2017 issue of PTE.
EVENTS | 2017-02-01

Calendar

The complete technical calendar from the February 2017 issue of Power Transmission Engineering.
FIELD NOTES | 2016-12-01

Bearing Lubricant Solution

A Chicago-area bakery was replacing the tray support bearings in its ovens on a reactionary basis. Their weekly inspection cycle was resulting in two mechanics spending an average of 20 labor hours per week to replace failed bearings. The premature bearing failures were caused by a combination of the high heat and humidity in the ovens, resulting in lubrication failure and contamination. When BDI was asked to recommend a solution, the bakery was averaging one month of bearing life in this application.
INDUSTRY NEWS | 2016-12-01

Industry News

News from around the industry.
| 2016-10-10

Klüber Lubrication Offers Specialty Lubricants for Open Drives and Gears Keeping Mineral Processing Plants Up and Running

Authors:  Daniel A. Narnhammer, Head of Global Competence Center Mining at Klüber Lubrication NA LP Justin Koozer, Cement and...
BEARING BRIEFS | 2016-10-01

Linear Motors

When the need arises for linear motion or positioning, there are many choices. One can use an Acme screw, ball screw, rack & pinion, or belts. The cost of a linear motor solution is generally greater than a mechanical linear product, but when one needs highly accurate, repeatable, high-speed motion, then the answer may be a linear motor.
INDUSTRY NEWS | 2016-10-01

Industry news

Latest News from around the industry.
PRODUCT NEWS | 2016-09-01

Product News

News about recent products in the Industry
BEARING BRIEFS | 2016-09-01

Proper Handling of Bearings

Rolling-element bearings are high-precision components that need to be stored and handled carefully to perform as designed. Proper storage and handling of a bearing before, during and after installation is important because once debris enters a bearing, it reduces the life.
FIELD NOTES | 2016-09-01

Cutting Downtime in Lumber Application

Ernest Head (Arnie), CBS and technical sales representative at Motion Canada helped save a lumber industry customer time and money by adapting a bearing solution for another client. Here’s how:
| 2016-08-09

IMTS 2016 First Look

Matthew Jaster, Senior Editor Because the general metalworking industry can’t have all the fun in Chicago this September, here’s a quick guide t...
BEARING BRIEFS | 2016-08-01

Analyzing Wind Power

Wind is a form of solar energy. Winds are caused by the uneven heating of the atmosphere by the sun, the irregularities of the earth’s surface, and rotation of the earth. Wind Turbines convert the kinetic energy in wind into mechanical power.
FIELD NOTES | 2016-08-01

High-Temp Bearing Replacement

Richard (RJ) Seguin, CBS and technical sales representative at AMI Bearings, explains how his bearing expertise tripled the life of a customer’s bearings.
| 2016-07-11

Mind Sport

Stronghold Competition Puts the Fun in FIRST Robotics   Matthew Jaster, Senior Editor Here’s what we know about Tremont, Illinois: I...
| 2016-04-12

You Need an Electric Motor for Your Application — Which One Do You Choose?

Often I get asked the generic question — “Which motor should I use?” But the answer is not quick or easy. The proper choice of the motor may ...
FEATURE ARTICLES | 2016-04-01

Nasa Glenn Research Center - A Look Back

In 1941, the federal Aircraft Engine Research Laboratory set up shop in Cleveland, Ohio. This year, and several name changes later, what is now the NASA Glenn Research Center celebrates its 75th anniversary. As part of the year-long festivities, Glenn’s adjunct Lewis Field main campus will be open to the public May 21 and 22, and Plum Brook Station in Sandusky, Ohio will hold its open house June 11 and 12.
INDUSTRY NEWS | 2016-04-01

Industry News

News from around the Industry.
BEARING BRIEFS | 2016-03-01

Load Ratings & Bearing Life

Power Transmission Engineering is collaborating with the Bearing Specialists Association (BSA) on a special section within the magazine. Bearing Briefs will present updated reports on bearing topics for each issue in 2016. Complimentary access to all BSA Bearing and Industry Briefs is available on the BSA website at www.bsahome.org/tools.
BEARING BRIEFS | 2016-02-01

Counterfeit Consequences

Power Transmission Engineering is collaborating with the Bearing Specialists Association (BSA) on a special section within the magazine. Bearing Briefs will present updated reports on bearing topics for each issue in 2016. Complimentary access to all BSA Bearing and Industry Briefs is available on the BSA website at www.bsahome.org/tools. Additionally, our new Field Notes section on page 34 will feature field reports from BSA’s Certified Bearing Specialists.
FIELD NOTES | 2016-02-01

Identifying Bearing Failure

Guy Gendron, certified bearing specialist and technical sales representative at Timken Canada L.P. explains how he used his bearing expertise to increase a customer’s productivity.
FEATURE ARTICLES | 2016-02-01

Motor Management Best Practices Part 3

This three-part series on motor management best practices focuses on the importance of instituting a motor management plan as a necessity in effectively administering the electric motors in a facility. The goal of a motor management plan is to take advantage of opportunities for energy savings and increased productivity using energy efficient, reliable motors such as NEMA Premium efficiency motors, herein referred to as “premium efficiency” motors.
INDUSTRY NEWS | 2016-02-01

Industry News

Latest news from around the Industry
INDUSTRY NEWS | 2015-12-01

Industry News

News from around the industry
FEATURE ARTICLES | 2015-12-01

Motor Management - Best Practices

Energy costs and downtime can be greatly reduced by instituting a motor management plan. Part II of this three-part series specifically addresses the establishment of a motor failure policy and the development of purchasing specifications. Part I addressed the general aspects of a motor management plan, including the first steps of creating a motor inventory and guidelines for motor repair and replacement. Part III will examine motor repair specifications as well as preventive and predictive maintenance.
FEATURE ARTICLES | 2015-10-01

Motor Management - Best Practices

Reducing losses and increasing profits by instituting a motor management plan is what this series of articles is all about. Here in Part I, we discuss how to create a motor inventory and establish repair-or-replace motor guidelines. Subsequent topics in this three-part series will address (Part II) motor failure policies and purchasing specifications, and (Part III) repair specifications and preventive and predictive maintenance, respectively.
INDUSTRY NEWS | 2015-09-01

Industry News

News From Around the Gear Industry
FEATURE ARTICLES | 2015-09-01

Gear, Gear Drive and Power Transmission Component Suppliers at Gear Expo 2015

Gear, Gear Drive and Power Transmission Component Suppliers at Gear Expo 2015
INDUSTRY NEWS | 2015-08-01

Baby Steps in Wind Energy

The Department of Energy estimates that 4 million megawatts of potential power—four times the amount all U.S. power plants combined currently produce—exists in offshore wind energy. Construction of America’s first offshore wind turbines began in July. The wind farm, which is being constructed off the coast of Block Island, RI, will consist of five turbines. Together, they will produce 30 MW.
FEATURE ARTICLES | 2015-08-01

And the Winner Is

Excellence Awards Competition, sponsored by the Metal Powder Industries Federation, were recently announced at the POWDERMET2015 International Conference on Powder Metallurgy & Particulate Materials. Receiving grand prizes and awards of distinction, the winning parts are examples of PM’s precision, performance, complexity, economy, innovation and sustainability. The winning parts show how customers from around the world are taking advantage of PM’s design advantages.
INDUSTRY NEWS | 2015-06-01

Industry News

News from Around the Industry
INDUSTRY NEWS | 2015-04-01

Industry news

News From Around the Industry
FEATURE ARTICLES | 2015-04-01

Wind Pushing Future of Mechanical Components

After a sluggish 2013, annual installations of new wind turbines grew by 44% in 2014, according to the Global Wind Energy Council. And while much of that growth has been in Asia— particularly China, which now leads the world with 114 GW of installed capacity—the USA, Europe, and the rest of the world expect steady growth for the next couple of years as well (Fig. 1).
INDUSTRY NEWS | 2015-03-01

INDUSTRY NEWS

News From the Industry
INDUSTRY NEWS | 2015-02-01

Industry News

News from around the Industry
EVENTS | 2014-12-01

Motors and Motion Meet in St. Louis

The motors might be small, but the big-brain technology driving these electrical wonders was on full display at the 2014 Small Motor & Motion Association Fall Technical Conference, convened November 4-6 in St. Louis, MO. SMMA, the manufacturing trade association (120 members strong) that tends to the best interests of the electric motor and motion control industries — including manufacturers, suppliers, users, consultants and universities — played gracious host to a wide array of presenters from an equally diverse range of sources — from academia to the federal government. Like gears, motors are most everywhere, as evidenced by SMMA’s membership (consumer-, public interest-, national defense- and commercial-oriented) demographic which includes: appliance; transportation; medical equipment; office automation and computers; aerospace; and industrial automation. The association’s mission: To “serve as the principal voice of the electric motors and drives industry” and to provide a forum to “develop, collect and disseminate technical and management knowledge.”
FEATURE ARTICLES | 2014-12-01

The Small Motor Rule, How Will This Affect You

According to the Department of Energy (DOE), more than half of all electrical energy consumed in the U.S. is used by electric motors. To address this, several years ago, the DOE conducted a technical study as to what could be done to raise the efficiency levels of “small” motors. After years of study and litigation, the Small Motor Rule (SMR) was passed that covers two-digit NEMA frame single- and three-phase ¼ through 3 horsepower motors in open enclosures.
TECHNICAL ARTICLES | 2014-12-01

The Applications of Bevel Gears

EDITORS’ NOTE: “The Applications of Bevel Gears” is the excerpted third chapter of Dr. Hermann Stadtfeld’s latest book — Gleason Bevel Gear Technology (The Gleason Works, Rochester, New York, USA; All rights reserved. 2014; ISBN 978-0-615-96492-8.), which appears here unabridged through the kind graces of Dr. Stadtfeld and Gleason Corp. Future installments will appear exclusively in Power Transmission Engineering and Gear Technology magazine over the next 12 to 18 months.
PUBLISHER'S PAGE | 2014-12-01

Encouragement and Enthusiasm

In the Stott household, we love math. Well, maybe not everyone in my household loves it equally, but since they were in kindergarten, whenever one of my children asked me for help with math homework, my reply has been an instant and cheerful “We love math!”
EVENTS | 2014-10-01

Calendar

The Calendar for events happening in the industry
INDUSTRY NEWS | 2014-09-01

Industry News

The complete Industry News section from the September 2014 issue of Power Transmission Engineering.
TECHNICAL ARTICLES | 2014-08-01

Dude - Where's My Preload

Many of us have been there; the bearings had the correct preload. You know it, you were there, and you personally saw the measurements. Now, the testing is done and the preload is gone. Not a little gone, not sort of gone - gone, gone. Finger pointing ensues. Suppliers are dragged in by their wrinkly Polo collars. You know the drill. Losing preload in a tapered roller bearing (TRB) system over the life of your application can be a troublesome problem, particularly for gear sets that are prone to noise or severe applications that rely on a very rigid and stable system.
POWER PLAY | 2014-08-01

Solving the Longitude Challenge

300-Year-Old discovery remains vital to scientific research today.
INDUSTRY NEWS | 2014-04-01

Industry News

The complete Industry News section from the April 2014 issue of Power Transmission Engineering.
PRODUCT NEWS | 2014-03-01

Product News

The complete Product News section from the March 2014 issue of Power Transmission Engineering.
| 2013-12-01

PT Extras

Video from Maxon Motors, Hannover Messe on our LinkedIn page and the NFPA annual conference on our Facebook page.
INDUSTRY NEWS | 2013-12-01

Industry News

The complete Industry News section from the December 2013 issue of Power Transmission Engineering.
POWER PLAY | 2013-08-01

Seabees

For the Seabees, hazardous construction zones have always been part of the job.
FEATURE ARTICLES | 2013-08-01

Shaking Hands in Indianapolis

Gear manufacturers set to talk with gear buyers at Gear Expo 2013.
PUBLISHER'S PAGE | 2013-06-01

Chasing Ubiquity

Power Transmission Engineering is the magazine of mechanical components. When you think of gear drives, bearings, motors, couplings, clutches, brakes and similar products, we want you to think of us. But achieving such front-of-mind presence is one of the most difficult goals in publishing...
FEATURE ARTICLES | 2013-06-01

Bearing Associations Help Demystify Bearings Buys

The ABMA, BSA and PTDA help keep things rolling.
INDUSTRY NEWS | 2013-04-01

Industry News

News from Timken, Klueber, Sumitomo, NFPA, and more from the April 2013 issue of Power Transmission Engineering
INDUSTRY NEWS | 2012-12-01

Industry News

The complete Industry News section from the December 2012 issue of Power Transmission Engineering.
EVENTS | 2012-12-01

PTDA Wraps Up 2012 with Successful Industry Summit

The PTDA Industry Summit, held on October 18-20, 2012 in Dallas, Texas, featured more than 700 participants for two-and-a-half days of networking opportunities and good old-fashioned Texas-style fun.
INDUSTRY NEWS | 2012-10-01

Industry News

The complete Industry News section from the October 2012 issue of Power Transmission Engineering.
FEATURE ARTICLES | 2012-10-01

Getting Creative

Beverage industry conveyor pours on advantages in distribution center. Case study describes the new conveying systems at Motion Industries Canada.
INDUSTRY NEWS | 2012-06-01

Industry News

The complete Industry News section from the June 2012 issue of Power Transmission Engineering.
EVENTS | 2012-06-01

Green Days - Hannover Messe 2012

Hannover Messe 2012 generated enough buzz that the 5,000 exhibitors “will have their work cut out for them,” according to Dr. Wolfram von Fritsch, chairman of the managing board of Deutsche Messe. “Green technologies are a viable business model with the power to drive growth around the world.
FEATURE ARTICLES | 2012-04-01

Hydraulics & Pneumatics Assessment

The National Fluid Power Association (NFPA) is an organization consisting of manufacturers, distributors, suppliers and educators working together to strengthen the fluid power market. Its mission is to serve as a forum where all fluid power channel partners can advance fluid power technology and successfully compete in the global industrial market.
INDUSTRY NEWS | 2012-04-01

Industry News

The complete Industry News section from the April 2012 issue of Power Transmission Engineering
POWER PLAY | 2012-02-01

Major Tom Meets Rocket Man

NASA launches Third Rock Radio.
INDUSTRY NEWS | 2012-02-01

Industry News

The complete Industry News section from the February 2012 issue of Power Transmission Engineering.
INDUSTRY NEWS | 2011-12-01

Industry News

The complete Industry News section from the December 2011 issue of Power Transmission Engineering.
FEATURE ARTICLES | 2011-10-01

A Case for Large-Scale Manufacturing

Big components aim to revive the North American industrial market.
INDUSTRY NEWS | 2011-10-01

Industry News

The complete Industry News section from the October 2011 issue of Power Transmission Engineering.
INDUSTRY NEWS | 2011-08-01

Industry News

The complete Industry News section from the August 2011 issue of Power Transmission Engineering.
INDUSTRY NEWS | 2011-04-01

Industry News

The complete Industry News section from the April 2011 issue of Power Transmission Engineering.
TECHNICAL ARTICLES | 2011-02-01

Opportunities Amidst Crises

Energy-challenged industries--and countries--can benefit from improved motor design and materials.
INDUSTRY NEWS | 2011-02-01

Industry News

The complete Industry News section from the February 2011 issue of Power Transmission Engineering.
EVENTS | 2010-12-01

AWEA to Wind Supporters--Do Not Panic

Despite posting its slowest quarter since early 2007, AWEA remains optimistic that the wind industry can and will work successfully with the revolving doors in Washington.
FEATURE ARTICLES | 2010-10-01

Book Review: Design of Permanent-Magnet Brushless Machines

The latest offering by machine design experts J.R. Hendershot and T.J.E. Miller is an 822-page brushless permanent-magnet (PM) machine design book that serves as a worthy follow-up to their 1994 work.
FEATURE ARTICLES | 2010-08-01

A Need for Reduced Energy Costs

Options abound for increased efficiency in lubrication.
VOICES | 2010-05-01

AGMA--American Name, International Association

AGMA Voices is a new feature brought to you by Gear Technology in cooperation with the American Gear Manufacturers Association. AGMA Voices will give you opinions, insight and information presented by various AGMA staff members, board members, committee heads and volunteers. In this column, Gear Technology will bring you guest editorials from the gear industry’s leading association.
FEATURE ARTICLES | 2010-04-01

Linear Motion Q&A: Customized Machinery Built with Off-the-Shelf Components

This Q&A session with various experts at Thomson Linear Systems covers linear slides & stages, clutches & brakes, bearings and actuators.
EVENTS | 2010-04-01

SMMA Spring Management Conference Navigates Recovery

The SMMA – Motor and Motion Association is ditching the slickers and galoshes for this year’s Spring Management Conference, themed “After the Storm: Navigating in the New World.”
TECHNICAL ARTICLES | 2010-02-01

Reducing Electricity Cost through Use of Premium Efficiency Motors

motors with premium efficiency counterparts presents businesses with a significant opportunity to reduce operating costs. A comparison between premium and standard efficiency motors from 0.25 to 10 horsepower is conducted; comparisons of full-load efficiencies are shown, and estimated payback periods are calculated. Methods for calculating the yearly kilowatt-hour consumption and yearly cost savings of premium efficiency motors for this horsepower range are also given. The cost advantages of premium efficiency motors are summarized, and relevant examples of real world cost savings are shown.
FEATURE ARTICLES | 2010-02-01

AGMA in Full Support of Energy Initiative

Our politicians in Washington continue dithering over the Obama administration energy bill aimed at developing alternative, green sources of energy production. As a result, when this country will have a viable energy program in place is anyone’s guess, given the usual D.C. gridlock. And yet, Americans can take more than cold comfort in the fact that at least some government agencies—U.S. Department of Energy (DOE)—and the private sector—some major manufacturers—are doing more than their share of work in trying to harness our existing, fossil-based energy sources in such a way that they are used to their best efficiencies.
FEATURE ARTICLES | 2009-08-01

Autosave Increases Productivity, Reduces Downtime for Nestle Purina

As automation devices have grown more complex and have incorporated more plant data in their operation, there is an increased need for programming changes to continue smooth operation or improve performance. In environments requiring frequent changes, it is not uncommon for code to be lost or changes overwritten, resulting in increased downtime and decreased productivity
TECHNICAL ARTICLES | 2009-04-01

Historic Danish Theatre Gets a Facelift

The Royal Danish Theatre has occupied the heart of Copenhagen for centuries and recently upgraded to a new control system featuring Sprint Electric DC drives to extend the lives of the existing motors, keeping replacement costs down. The Swedish stage design and technology company Visual Act retained most of the original motors and mechanics while providing a much-needed facelift to the stage.
PRODUCT NEWS | 2009-02-01

Product News

The complete Product News section from the February 2009 issue of Power Transmission Engineering.
TECHNICAL ARTICLES | 2008-12-01

BSA is the Forum that Keeps Bearing Companies Rolling

In today’s increasingly competitive global economy, industries and the companies that serve them are always looking for an edge. Price and quality being routinely accepted as a given, businesses—large and small—are always looking for a little help. For the worldwide bearing industry, that help exists in the form of the Bearing Specialists of America (BSA).
TECHNICAL ARTICLES | 2008-06-01

Custom-Made Manufacturing

Sound business model increases opportunities for Misumi USA Inc.
FEATURE ARTICLES | 2008-06-01

Motor Decisions Do Indeed Matter--Big Time!

CEE/NEMA repair-or-replace campaign saves energy, dollars and downtime.
FEATURE ARTICLES | 2008-04-01

MPTA Remains a Viable Resource for Power Transmission Industry

The Mechanical Power Transmission Association was founded in 1933 as the Multiple V-Belt Drive and Mechanical Power Transmission Association.
POWER PLAY | 2008-02-01

Eat Your Heart Out, Spielberg

"Restless Planet" transports guests to a Jurassic landscape with more than 100 animatronic dinosaurs.
FEATURE ARTICLES | 2007-10-01

AGMA

Readers of our sister publication, Gear Technology, are perhaps more familiar with the American Gear Manufacturers Association (AGMA) than our PTE audience. Now more than 90 years old, AGMA continues to thrive as a global, relevant go-to resource and service provider—from metrology to tribology—for its more than 400 worldwide members. PTE put some questions regarding AGMA—now, and going forward—to AGMA president Joe T. Franklin, Jr.
FEATURE ARTICLES | 2007-04-01

PTDA

Single-vendor sourcing has probably never been more attractive to businesses of all types—especially manufacturing—than it is today. The concept makes perfect sense, especially for companies that buy power transmission and motion control components. Big dollars and perhaps even bigger safety issues ride on the quality, performance and reliability of the components used for any number of applications.
[advertisement]