The complete Industry News section from the December 2020 issue of Power Transmission Engineering.

If torque conversion with high gear ratio, compact installation space and 90-degree axis-crossing angle is needed, often worm gears are used. Due to their high power density and sliding speeds within the tooth contact, frictional heat and thermal stresses are higher compared to helical, bevel and hypoid gears, and thus the thermal load capacity of worm gears is lower.

The industrial arts of mechanical engineering are all around us and seen in many forms and technologies. Of greatest interest is how these wonders are designed, constructed and used. From the smallest home appliance to the behemoths used for outsize building and excavation projects.

A discussion of the evolution of condition monitoring for bearings and the upcoming introduction of company's next-generation condition monitoring platform.

---

Wherever a lot of computing is performed or high currents flow, large amounts of waste heat are generated. Freudenberg Sealing Technologi...

The latest product news from Miki Pulley, Voith, Firgelli Automations, Heidenhain, Zero-Max, Gates, KEB America, Siemens, H2W Technologies and Emerson Automation

Brake Upgrade Fixes Manufacturing Challenges at SAF

Working three shifts around the clock throughout the week doesn’t leave time in the s...

Cortec is globally committed to providing corrosion solutions that are both cost-effective and environmentally-sound. The organization has stepped ...

Boosting Productivity in Gearbox Design with Siemens Digital

An increasing awareness of environmental concerns has given rise in the auto...

High torque, low-speed testing is often a challenge for dynamometers equipped with traditional load brakes. Testing which requires the brake to abs...