We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
When designing a spur-crown pair, is there a formula, guideline or design guide for adapting the spur teeth for the radial angle of the teeth in the crown?
Dovetails, gears and splines have been widely used in aero engines where fretting is an important failure mode due to loading variation and vibration during extended service. Failure caused by fretting fatigue becomes a prominent issue when service time continues beyond 4,000 hours. In some cases, microslip at the edge of a contact zone can reduce the life by as much as 40–60 percent.
Everything started in 1800 when Volta developed the first DC battery. Faraday used the DC battery to develop the first electric motor. It used brushes to transfer the battery voltage and current to the rotating disk rotor. This was in mid-1831. Thus was born the brush DC motor.
Implementing a predictive maintenance
(PM) program can be tough. Despite its proven success, many companies have been operating the same way for over 50 years and don’t know where to start. Understanding where to start and where to focus is critical. The intention of this article is to give insight to start and sustain an effective program using today’s technology and devices.