In an urgent assignment, a gear has to be designed, with the engineer already knowing the required reduction ratio, torque and speed. On the manufacturing side, the preferred materials, possible qualities and the reference profiles are specified. This initial situation represents an everyday task.

NYCU (National Yang Ming Chia Tung University) Vulpes Racing—founded in 2008—is a Formula Student Team that combines mechanical engineering, industrial design, public relations, video production and marketing expertise. 

The new KISSsoft release 2023 comes with numerous novelties. Among others, Gear Mesh Frequencies (GMF) can now be calculated for cylindrical and bevel gears. GMF results are visualized in two different diagrams, i.e. GMF versus rotational frequency of the reference gear, and GMF versus amplitude.

This study presents a simulation method for considering complex wheel bodies in an analytical tooth contact model. The wheel body is considered using reduced FE stiffness. Reduction points are defined over the width and linked with the analytical gear.

For cylindrical wheel bodies, comparative calculations show fewer deviations from the expected results with the new method. This is due to the additional degrees of freedom in the FEM model. In the calculation with cylindrical wheel bodies, bending due to axial force in tooth contact could also be verified in addition to the deformation in tooth contact and the influence of the shaft-bearing system.

I think I spend more time talking about ball bearings today than at any other time in my career. Ball bearings have always had a large place in automotive, but not typically in high demand positions—other than a few niche areas. High demand positions, such as axles and planetaries, were typically reserved for tapers, needles and cylindricals. The landscape is changing quickly.

Applied Flow Technology (AFT) has expanded their team with the hire of two new engineers and one software developer to join their pipe flow modeling team. 

In the first quarter of 2022, the WEG High Voltage Service team (HVService) based at WEG Portugal facilities, successfully completed the commissioning of two Medium Voltage Variable Frequency Drives system for low pressure (LP) centrifugal fuel gas compressors at a FPSO (Floating Production Storage and Offloading) vessel at the Gulf of Mexico

Manufacturer-independent engineering tools, such as KISSsoft, basically offer users the opportunity to offer more flexibility in selecting suppliers and procuring components. On the other hand, in some cases there is no access to exclusive product data from the manufacturer in order to be able to perform the calculation with the greatest possible accuracy and reliability.

Renewable Lubricants presents patented, ultimately biodegradable Bio-E.P. Gear Oils which are ideal lubricating spur, helical, bevel, and worm gears subject to heavy loading or shock loading in heavy-duty applications.   

GWJ Technology GmbH has extended the output option of tooth forms of involute gears. GWJ has extended the output of tooth forms in 2D DXF format in its calculation modules single cylindrical gears, cylindrical gear pairs, planetary gear trains, three- and four-gear train systems, gear racks and involute splines as part of the new versions of its calculation solutions eAssistant and TBK.